Flotation is an important part of coal preparation, and the flotation column is widely applied as efficient flotation equipment. This process is complex and affected by many factors, with the froth depth and reagent dosage being two of the most important and frequently manipulated variables. This paper proposes a new method of switching and optimizing control for the coal flotation process. A h...

In this paper the possibility of using the pyrolysis oil derived from waste tyres as a collector in flotation of coal was evaluated. The pyrolysis oil was obtained at the initial and final pyrolysis temperatures of 400 and 700 C, respectively, and the heat holding time of 30 min. Flotation results indicated that the pyrolysis oil emulsion showed stronger collecting ability than diesel and the c...

an attempt has been made in this paper to investigate the effect of particle size distribution on coal flotation kinetics. the effect of particle size (ps) on kinetics constant (k) and maximum theoretical flotation recovery (ri) was investigated while other operational parameters were kept constant. the relationship between flotation kinetics constant and theoretical flotation recovery with par...

in this study, the possibility of producing coal with less than 11% ash from tailings of flotation process was investigated. the effect of six flotation parameters: collector type, collector consumption, frother type, frother consumption, pulp density and mixing rate were studied on a sample from a tailing dam. a software based experimental design approach (dx7) was applied to determine and mod...

In the present research work, a low-ash coal, from Ghouzlou deposit in Iran, with an average ash content of 12% was subjected to some beneficiation experiments such as heavy media separation and flotation. Sieve analysis showed that 62.3% of the coal sample with the size of +2 mm had around 7.3% ash contents. Also, heavy media tests carried out on five size fractions revealed that by setting th...

A simple thermodynamic analysis suggests that oil can spontaneously displace water from coal’s surface if the coal particle has a water contact angle greater than 90°. However, the clean coal products obtained from laboratory-scale dewatering-by-displacement (DbD) test work assayed moistures substantially higher than expected. These high moisture contents were attributed to the formation of wat...

An attempt has been made in this paper to investigate the effect of particle size distribution on coal flotation kinetics. The effect of particle size (Ps) on kinetics constant (k) and maximum theoretical flotation recovery (RI) was investigated while other operational parameters were kept constant. The relationship between flotation kinetics constant and theoretical flotation recovery with par...

In this study, the possibility of producing coal with less than 11% ash from tailings of flotation process was investigated. The effect of six flotation parameters: collector type, collector consumption, frother type, frother consumption, pulp density and mixing rate were studied on a sample from a tailing dam. A software based experimental design approach (DX7) was applied to determine and mod...

tabas mines in iran have coal sources which are suitable for use in metallurgy industries as coking coal. but the high sulfur content of this coal imposes severe limitations on its utilization as the sulfur oxide gases evolved from the combustion of high sulfur coals result in acid rains and corrosion of equipments. in this work, attempts have been made to reduce sulfur from high sulfur coal of...

The dispersion behavior of particles is of great significance in selective flocculation flotation. The interfacial interaction between coal and the main impurity mineral (kaolinite) particles with the effect of an anionic polyacrylamide (PAM A401) was explored by the extended Derjagin–Landau–Verwey–Overbeek (DLVO) theory. The involved surface free energy components of fine mineral particles wer...