CO oxidation over polycrystalline ruthenium dioxide was monitored in an in-situ XRD setup. The evolution of the bulk state of the catalyst was followed by in-situ XRD during reaction, while the surface morphology and chemical state before and after reaction were investigated by HRSEM and EDX. The commercial RuO2 powder was calcined prior reaction to ensure the formation of completely oxidized R...

A systematic study was conducted to understand the influences of catalyst combination as Ni-Co NPs on carbon nanotubes (CNTs) grown by Chemical Vapor Deposition (TCVD). The DC-sputtering system was used to prepare Co and Ni-Co thin films on silicon substrate. Ni- Co nanoparticles were used as metal catalyst for growing carbon nanotubes from acetylene (C2H2) gas in 850 ̊ C during 15 min. Carb...

The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO₂ and Pt/α-Al₂O₃ catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO₂, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the c...

Monometallic and bimetallic Ni and Co catalytic nanoparticles supported on Titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. These nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (MWCNTs) from acetylene decomposition at 700°C by the catalytic chemical vapor deposition (CCVD) technique. The nanomaterials (catalyst and CNTs) were...

The solid catalyst with high catalytic activity and enantioselectivity in the hydrolytic kinetic resolution (HKR) of epoxides was prepared by confining Co(Salen) in the nanocage of SBA-16 through reducing the pore entrance size using a silylation method. It was found that the activity of the solid catalysts increased with the number of [Co(Salen)] molecules per nanocage increasing, and the soli...

Fischer-Tropsch synthesis is a promising route for production of light olefins via CO hydrogenation over transition metals. Co is one of the most active metals for Fischer-Tropsch synthesis. Some different variables such as preparation parameters and operational factors can strongly affect the selectivity of Fischer-Tropsch synthesis toward the special products. In the case of preparat...

The (salen)Co(III)-catalyzed hydrolytic kinetic resolution (HKR) of terminal epoxides is a bimetallic process with a rate controlled by partitioning between a nucleophilic (salen)Co-OH catalyst and a Lewis acidic (salen)Co-X catalyst. The commonly used (salen)Co-OAc and (salen)Co-Cl precatalysts undergo complete and irreversible counterion addition to epoxide during the course of the epoxide hy...

nanometric carbid silicon (sic) supported monometallic and bimetallic catalysts containing fe, co, ni transition metals were prepared by wet impregnation method. multiwall carbon nanotubes (mwcnts) were synthesized over the prepared catalysts from catalytic decomposition of acetylene at 850°c by thermal chemical vapor deposition (tcvd) technique. the synthesized nanomaterials (catalysts and cnt...

Coupling with robust surfaces is a promising approach to improve the stability and recyclability of highly active molecular catalysts. This study builds on our prior success to deposit a Co(iii) cyclam complex, where cyclam is 1,4,8,11-tetraazacyclotetradecane, on mesoporous silica via a microwave-assisted process. The Co(iii) complex was successfully deposited on the silica surface through rea...

sio2-supported silyl chromate catalyst is an important industrial catalyst for production of high grade hdpepipe materials. the control of the short chain branch (scb) distribution using this catalyst system is still a greatchallenge. in this work, ethylene and 1-hexene copolymers were synthesized using sio2-supported silyl chromatecatalyst combined with triisobutylaluminium (tiba), triethylalu...