(HIPing), can improve the tribo-mechanical properties of cobalt-based alloys. The alloy selected for this investigation had a nominal wt.% composition of Co-30Cr-14W-1C, which is similar to the composition of the commercially available Stellite®4 alloy. The Hot Isostatic Pressed (HIPed) alloy had a much finer microstructure than the cast alloy, which showed a typical hypoeutectic dendritic micr...

Ceramometal bond strength has played an important role for the replacement of gold alloys by nickel-chromium alloys in dentistry. This study evaluated the metal/porcelain bond strength of three ceramic systems (Vita VMK 88, Williams and Duceram) associated with three nickel-chromium alloys (Durabond, Lite Cast B and Resistal P) and one experimental cobalt-chromium-titanium alloy. Thirty cast cy...

We report the synthesis of Co-Mo alloy nanoparticles with a uniform distribution of the alloy elements on CeO2via sodium naphthalenide-driven reduction. The resulting sample functions as a highly efficient and stable catalyst for ammonia synthesis. Based on the metal weight, the catalytic activity is ca. 20 times higher than that of Co3Mo3N.

Nanosized Co-Cr-V alloy powders were synthesized via coprecipitation method. Effects of precipitants ((NH₄)₂C₂O₄·H₂O and Na₂CO₃) and pH were investigated by X-ray diffraction (XRD), Zeta potential analyzer, thermogravimetry-differential scanning calorimetry (TG-DSC), inductively coupled plasma-atomic emission spectrometry (ICP-AES) and scanning electron microscopy (SEM). Co-Cr-V alloy powders w...

With the aim of applying to a magnetic core material, the effect of ribbon thickness on the magnetic properties of a (Fe, Co)-Si-B-P-Cu alloy ribbon was investigated. It is found that the Si addition in (Fe, Co)-Si-B-P-Cu nanocrystalline alloy increased the saturation magnetic flux density (Bs), but degraded the coercivity (Hc), suggesting that the Si addition should be suppressed to a little a...

Electrodeposition is a simple and economic technique for precision coating of different shaped substrates with pure metal, alloy or composite films. Dc electrodeposition was used to produce Cr, Co-Cr and Co-Cr/TiO2 nano-composite coatings from Cr(III) based electrolytes onto 316L SS substrates. The effects of TiO2 nanoparticles concentration on co-deposition of these particles along with Cr con...

To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...

The effects of metal combinations on cytotoxicity were examined following dynamic extraction by freely gyrating two spherical metals in a glass vessel. The cell viabilities of an Au alloy, a Ag-Pd-Au alloy and Ti were little affected by combinations among three metals. Cell viability ranged between 60 and 80% when precious alloys were in combination with Co-Cr or Ni-Cr alloys. Ti showed a clear...

The aim of this study was to investigate the electrochemical behavior of Co-Cr alloy in artificial saliva containing (-)-epigallocatechin gallate (EGCG) and to characterize the composition and structure of the passive film formed by potentiodynamic polarization.Electrochemical measurements ranked the corrosion resistance of Co-Cr dental cast alloy as follows when exposed to artificial saliva co...

Interfaces between alloys simulating binders in WC-Co cemented carbides and tungsten carbide were examined on the micro-, nano-, and atomic-scale. The precipitation of fine WC grains and η-phase occurs at the interface of the alloy with the low carbon content. The precipitation of such grains almost does not occur in the alloy with the medium-low carbon content and does not take place in the al...