In this study, corrosion behavior of copper that was deformed by Simple Shear Extrusion (SSE) method was investigated in 3%wt NaCl solution. Modified Williamson-Hall method, applied on the X-ray diffraction patterns of the samples, showed that increase in the number of SSE passes led to increasing in the dislocation density in the copper samples. Moreover, such deformed samples exh...

Stress and deformation analysis of the simple shear at finite strain of a strainhardening elastoplastic hollow circular cylinder is given. Both isotropic and anisotropic hardening models are considered. In the case of isotropic hardening, there is a closed form analytical solution. No normal stresses exist in this case. Purely kinematic hardening with a Mises-type yield condition is utilized as...

Flow instabilities occur in a variety of commercial polymer processing operations including extrusion, film blowing, fiber spinning and coating. During the extrusion of molten polymer through capillary or slit die geometries, a transition from a smooth surface to a nearly periodic ridge-like surface distortion has been observed at a critical shear rate or wall shear stress (Petrie and Denn 1976...

An investigation has been carried out into the microstructures developed during the early stages of equal channel angular extrusion (ECAE) in a polycrystalline single-phase Al-0.13Mg alloy, with emphasis on the substructural alignment with respect to the die geometry and the crystallographic slip systems, which is essentially related to the grain refinement and texture development during deform...

Capillary rheometry simulates polymer extrusion in a simplified way. It allows the characterisation of polymers by means of determination of the viscosity function and extrudate swell. As regards viscous properties, there is still a lack of constitutive characterisation of rubber blends. In this contribution new concepts are presented how the viscous properties are computed without using common...

Micromechanic theory of fatigue crack initiation by Lin and his associates is reviewed. Intrusions and extrusions have been observed in fatigue specimens. An initial stress field favorable for the growth of extrusion or intrusion can be produced by arrays of dislocation dipoles as shown by Lin (1969). These dipoles cause an initial tensile strain giving an elongation which is called the static ...

In this paper, a generalized expression for the flow field in axisymmetric extrusion process is suggested to be valid for any dies and the boundary shapes of the plastic deformation zone. The general power terms are derived and the extrusion force is calculated by applying upper bound technique for a streamlined die shape and exponential functions for shear boundaries. It is shown that assuming...

The shear behavior of polymers obtained by means of devices such as capillary and cone-and-plate rheometers is commonly used to assess their processing performance and as a characterization tool. However, the number of instances when two polymers have the same shear properties but perform differently during certain types of processing operations (e.g. film blowing and sheet extrusion) indicate ...

Many fabrication processes for polymeric objects include melt extrusion, in which the molten polymer is conveyed by a ram or a screw and the melt is then forced through a shaping die in continuous processing or into a mold for the manufacture of discrete molded parts. The properties of the fabricated solid object, including morphology developed during cooling and solidification, depend in part ...

dehbid mylonite nappes associated with the tutak gneiss dome as the zagros hinterland involved-basement window in the zagros orogenic belt has significant components of dextral sense of shear along the mylonite nappes and are related to the high proportion of simple shear relative to pure shear deformation. kinematic vorticity analysis (wk) was made in order to determination of relative amounts...