Critical heat flux (CHF) was measured for a water-cooled micro-channel heat sink containing 21 parallel 215· 821 lm channels. Tests were performed with deionized water over a mass velocity range of 86–368 kg/ms, inlet temperatures of 30 and 60 C, at an outlet pressure of 1.13 bar. As CHF was approached, flow instabilities induced vapor backflow into the heat sink’s upstream plenum, which signif...

Fluid transport is accomplished in a micro throttle pump (MTP) by alternating deformation of a micro channel cast into a PDMS elastomeric substrate. The active deformation is achieved using a bimorph PZT piezoelectric disk actuator bonded to a glass diaphragm. The bimorph PZT deflects the diaphragm as well as alternately pushing and pulling the elastomer layer providing displacement amplificati...

Thermoelastic damping (TED) in a circular micro-plate resonator subjected to an electrostatic pressure is studied. The coupled thermo-elastic equations of a capacitive circular micro plate are derived considering hyperbolic heat conduction model and solved by applying Galerkin discretization method. Applying complex-frequency approach to the coupled thermo-elastic equations, TED is obtained for...

here, we propose an add-drop and a channel drop filter based on two-dimensional photonic crystal all circular ring resonators. these structures are made of a square lattice of silicon rods with the refractive index n1=3.464 surrounded by air (with refractive index n2=1). the broadest photonic band gap occurs at the filling ratio of r/a = 0.17. two linear defect w1 waveguides couple to the ring....

This paper presents a novel channel fabrication technology of bulk-micromachined monolithic embedded polymer channels in silicon substrate. The fabrication process favorably obviates the need for sacrificial materials in surface-micromachined channels and wafer-bonding in conventional bulk-micromachined channels. Single-layer-deposited parylene C (poly-para-xylylene C) is selected as a structur...

In this study, inelastic constitutive modelling is considered for the simulation of shear-thinning fluids through a circular channel. Numerical solutions are presented for power-law inelastic model, considering axisymmetric Poiseuille flow through a channel. The numerical simulation of such fluid is performed by using the Galerkin finite element approach based on artificial compression method (...

the effect of geometry and material of the micro/nano particle on contact mechanic for manipulation was studied in this work based on atomic force microscopy. hertz contact model simulation for eph biological micro particle with spherical, cylindrical, and circular crowned roller shape was used to investigate the effect of geometry on contact simulation process in manipulation. then, to validat...

abstract: since the field of micro electromechanical systems (mems) continues to grow, the flow in micro devices have become an area that receives a significant attention. the microscopic flows are usually characterized by the knudsen number (kn). when the characteristic size of the particle decreases down to a value comparable to the mean free path of the molecules, the continuum assumption fa...