A series of SnO2-ZnO composite nanostructured (thin) films with different amounts of SnO2 (from 0 to 50 wt %) was prepared and deposited on a miniaturized porous alumina transducer using the sol-gel and dip coating method. The transducer, developed by our research group, contains Au interdigital electrodes on one side and a Pt heater on the other side. The sensing films were characterized using...

Background: Iran is located in the seventh rank in terms of CO2 emissions resulting from the fuel combustion in the world. Gas compressor booster stations, due to the several sources of contaminants, are causing the release of large amounts of CO2 and CH4, which will cause climate change therefore, estimating the emissions of the gases from oil and gas, different processing units are necessary....

co2/ch4 gas separation is a very important applicatable process in upgrading the natural gas and landfil gas recovery. in this work, to investigate the membrane separation process performance, the gas permeation results andco2/ch4 separation characteristics of different prepared membranes (via blending different molecular weights of polyethylene glycol (peg) as a modifier with acrylonitrile-but...

 Abstract—An infrared dual-gas sensor system for the simultaneous detection and monitoring of methane (CH4) and ethane (C2H6) at parts-per-billion by volume (ppbv) concentration levels was developed using two room temperature, distributed feedback (DFB) interband cascade lasers (ICLs) and two miniature multipass cells with an effective absorption length of 54.6 m. Laser direct absorption spect...

Based on a multi-gas solution-diffusion problem for a dense symmetrical membrane this paper presents a transient theory of a planar, membrane-based sensor cell for measuring gas from both initial conditions: dynamic and thermodynamic equilibrium. Using this theory, the ranges for which previously developed, simpler approaches are valid will be discussed; these approaches are of vital interest f...

We report a new proof-of-concept bubble-based gas sensor for a gas chromatography system, which utilizes the unique relationship between the diameters of the produced bubbles with the gas types and mixture ratios as a sensing element. The bubble-based gas sensor consists of gas and liquid channels as well as a nozzle to produce gas bubbles through a micro-structure. It utilizes custom-developed...

mil-53-cu has been synthesized hydrothermally and has been used for the first time for gas separation. mil-53-cu shows adsorption capacities of 8.1, 0.7 and 0.5 m.mol/g, respectively, for ch4, co2 and h2 at 30 bar and 298 k. the high ch4 adsorption capacity of mil-53-cu maybe attributed to the high pore volume and large number of open metal sites. the high selectivity for ch4 over co2 (11.5) an...

In this work, three different graphene-based materials, namely graphite oxide (GrO), thermally reduced graphite oxide (T-RGrO) and ascorbic acid multi-phase reduced graphene oxide (AMP-RGO), were synthesized and used to produce mixed matrix membranes (MMM) based on Matrimid®5218 for as separation. From the samples produced, a complete set of characterization was performed including XRD, FTIR, T...

Transferable ZnO tetrapods were grown by an aqueous solution method. An individual ZnO tetrapod-based sensor was fabricated by in situ lift-out technique and its ultraviolet (UV) and gas sensing properties were investigated. This single tetrapod-based device responds to the UV light rapidly and showed a recovery time of about 23 s. The sensitivity of a single ZnO tetrapod sensor to oxygen conce...