Electrical connection of dissimilar metals will lead to galvanic corrosion. Therefore, overall surface treatment is necessary for the protection of dissimilar metal welded parts. However, serious unbalanced reactions may occur during overall surface treatment, which makes it difficult to prepare integral coating. In this paper, an overall ceramic coating was fabricated by plasma electrolytic ox...

The host response to calcium silicate ceramic coatings is not always favorable because of their high dissolution rates, leading to high pH within the surrounding physiological environment. Recently, a zinc-incorporated calcium silicate-based ceramic Ca2ZnSi2O7 coating, developed on a Ti-6Al-4V substrate using plasma-spray technology, was found to exhibit improved chemical stability and biocompa...

The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...

Plasma-sprayed ceramic coatings are being developed for many applications such as thermal barriers and corrosion protection. In plasma spraying, the ceramic powder is heated into semi-molten droplets for projection onto a target surface by a high velocity gas stream. This coating is then rapidly cooled to form a solid layer. By repeating this process for multiple layers, a coating thickness fro...

Fouling due to biofilms composed primarily of microorganisms and extracellular polymeric substances is a significant hindrance to membrane filtration in water treatment. The goal of this work was to use a reactive membrane surface to reduce membrane biofouling by coating a ceramic ultrafiltration membrane with the nanoparticulate photocatalyst, TiO2. 10-Day biofilm growth experiments were condu...

The loss of biological activity of phage λ DNA was much greater when the DNA was sheared using a ceramic-coated needle attached to a syringe compared with a conventional stainless steel needle. Inactivation of the biological activity was due to breakage at the middle of the molecule. The thickness of the ceramic-coating was a crucial factor for the breakage. Because approximately the same level...

Ceramic materials show excellent esthetic behavior, along with an absence of hypersensitivity, making them a possible alternative implant material in dental surgery. However, their surface properties enable only limited osseointegration compared to titanium implants. Within this study, a novel surface coating technique for enhanced osseointegration was investigated biologically and mechanically...

Silane coupling agents (SCAs) with different organofunctional groups were coated on the surfaces of Al₂O₃ ceramic particles through hydrolysis and condensation reactions, and the SCA-coated Al₂O₃ ceramic particles were dispersed in a commercial photopolymer based on interpenetrating networks (IPNs). The organofunctional groups that have high radical reactivity and are more effective in UV curin...

In an internal combustion engine, the heat energy approximately one third of total fuel input energy is converted to useful work. Since the exhaust gas temperature is not equal environmental temperature, so lot of heat energy lost with hot gases. Also heat energy is lost in cooling of engine. If we recovered heat energy which lost in cooling instead on crankshaft as useful work, then increase t...

PURPOSE The purpose of this study was to evaluate the effect of nano-structured alumina surface coating on shear bond strength between Y-TZP ceramic and various dual-cured resin cements. MATERIALS AND METHODS A total of 90 disk-shaped zirconia specimens (HASS CO., Gangneung, Korea) were divided into three groups by surface treatment method: (1) airborne particle abrasion, (2) tribochemicalsil...