A composite catalyst of rosin carbon/Fe3O4 with marvellous morphology was synthesized and applied as a counter electrode (CE) in dye-sensitized solar cells (DSCs), demonstrating notable electrocatalytic activity for the reduction of I3(-). Based on this CE, a high power conversion efficiency of 8.11% was achieved, comparable to that of the traditional Pt CE.

Synthesis of dimethyl carbonate (DMC) from CO2 and methanol under milder reaction conditions was performed using reduced cerium oxide catalysts and reduced copper-promoted Ce oxide catalysts. Although the conversion of methanol was low (0.005-0.11%) for 2 h of reaction, DMC was synthesized as low as 353 K and at total pressure of as low as 1.3 MPa using reduced Cu-CeO2 catalyst (0.5 wt% of Cu)....

Carbon nanotubes (CNTs) were prepared by the catalytic chemical vapor deposition of C2H2 at 550°C in 120 minutes using nanoparticles of Ni-Ce-Zr mixed oxides. The CNTs were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. The results revealed that CNTs with diameter of about 45 nm are o...

In this paper, conventional SAPO-34 and Cerium Hierarchical SAPO-34 zeolites are synthesized using a hydrothermal method for methanol-to-propylene (MTP) reaction. The Ce-H-SAPO-34 catalyst shows a slightly larger crystal size, bimodal pore size distribution (microporous and mesoporous) and lower surface acidity compared to conventional SAPO-34 catalysts. According to these physicochemical prope...

The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to ...

X-ray absorption spectroscopy and X-ray diffraction are suitable probes of the chemical state of a catalyst under working conditions but are limited to bulk information. Here we show in two case studies related to hydrothermal aging and chemical modification of model automotive catalysts that enhanced detailed information of structural changes can be obtained when the two methods are combined w...

It was found that the periodic change of the solution viscosity and density was generated in the Belousov-Zhabotinsky (BZ) reaction. This rhythmic phenomenon was observed in both the iron catalyst [[Fe(Phen)(3)](2+)-[Fe(Phen)(3)](3+)] and the cerium catalyst [Ce(III)-Ce(IV)] system, where the solution viscosity and density were synchronized with the redox potential in the in-phase mode. However...

In the present study, the catalytic wet oxidation of pharmaceutical sludge by molecular sieve loaded with Cu/Ce as catalyst was investigated. Experiments were performed in an experimental batch reactor. Reaction parameters including catalyst dose, temperature, time, and oxygen pressure were discussed. The results showed that the catalysts prepared by co-precipitating method have good catalytic ...

Direct sulfonation of methane with SO3 to methanesulfonic acid (MSA) is accomplished in sulfuric acid with almost 100% selectivity in the presence of a catalyst, namely, Ce and Rh salts and molecular oxygen as the catalyst regenerator. In the absence of O2, the catalyst remains effective but the selectivity to MSA decreases to 53% and byproducts, principally CH3OSO3H, are formed. The effects of...

In this study, ternary mixed metal oxide (Ce2O3/La2O3/Fe3O4) catalysts were synthesized for reduction of SO2 to sulfur by CH4. The response surface method (RSM) was used to optimize the synthesis conditions. The XRD, FESEM, BET, BJH, EDX and NH3-TPD analyses were performed to characterize the synt...