نتایج جستجو برای: capacity surface

تعداد نتایج: 895600  

heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...

Introduction: One of the factors that affects the rate of adsorption and removal of pollutants is the level of bed surface. Today, the use of active carbon substrates, synthetic zeolite such as Y and ZSM-5, are of great efficiency due to their high surface. In this research, diatomite modification was carried out using chemical and thermal processes to increase the bed surface and also the amou...

Journal: :iranian journal of chemistry and chemical engineering (ijcce) 2014
hossein faghihian marzieh rasekh

unmodified zeolites show little affinity for anions due to the fact that their surfaces are negatively charged. however modification of zeolites with amines turns their negative surface charge to positive and creating higher adsorption capacity for anions. in this study, polyaniline-clinoptilolite composite was prepared by polymerization of anilinium on the surface of zeolite. the composite was...

جعفری, علی , ستوده, احد , شیخ, آرمان , یارعلی, نبی‌اله ,

It is now certain that to ensure a long term sustainable development, protected areas, the favored destinations for ecotourism, required a well written planning management. Each destination however has limited capability which is called “carrying capacity” to invite visitors. Physical, real (ecological) and effective (manageable) are different kinds of carrying capacity. The current study prese...

Journal: :international journal of civil engineering 0
a. r. majidi mahab ghodss consulting engineering company a.a. mirghasemi university of tehran m. arabshahi university of tehran

in the current study, an effort is made to determine three dimensional bearing capacity of rectangular foundations using discrete element method. the soil mass is modeled as discrete blocks connected with winkler springs. different factors affect the geometry of failure surface. six independent angles are used to define the failure surface. by trial and error, the optimum shape of failure surfa...

Majideh Babaei, Mansoor Anbia, Maryam Kazemipour

In this work, a new synthesized Y-type zeolite with an Si/Al molar ratio of 2.5 (NaY) was modified with amines, in order to probe the influence of the modification of the adsorbent’s surface on CO2 adsorption. The three selected amines were diethanolamine, tetraethylenepentamine, and 2- methylaminoethanol. The surface nature of NaY was changed after amine modification, which causes a...

Journal: :international journal of environmental research 2010
h.r. tashauoei h. movahedian attar m. kamali m.m. amin m. nikaeen

chromium (vi) adsorption behavior and capacity by surface modified nanozeolite a has been investigated. surface modification was performed and the morphology of modified and unmodified nanozeolite was studied using scanning electron microscope (sem) and transmission electron microscope (tem). adsorption isotherms were studied under different conditions (ph, adsorbent dose, adsorbate concentrati...

Biological inhibition of air pollution has vast advantages over physicochemical methods. One of the biggest challenges faced by researchers with traditional bio-filter in controlling Volatile Organic Compounds (VOCs) such as Benzene, Toluene, Ethylbenzene, and Xylene (BTEX) is, low degradation rate (elimination capacity) and accumulation of very high biomass. The use of metabolic uncouplers...

Journal: :Journal of experimental psychology. Human perception and performance 2014
Mouna Attarha Cathleen M Moore Alec Scharff John Palmer

Capacity limitations of perceptual surface completion were assessed using a simultaneous-sequential method. Observers searched among multiple surfaces requiring perceptual completion in front of other objects (modal completion) or behind other objects (amodal completion). In the simultaneous condition, all surfaces were presented at once, whereas in the sequential condition, they appeared in su...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید