For hot extrusions of magnesium alloy sheets, Dissimilar AZ80 and AZ31 were used, in which AZ80 was placed on advancing side and AZ31 on retreating side, using friction stir butt welding with different process parameters. Some defect-free welded joints with good weld surfaces could be obtained with some suitable welding conditions. The maximum tensile strength of welded joint which is 225.5 MPa...

In this work the quasi-static response of thermoplastic butt-joint stiffened beam in bending conditions is modeled. In these panels, the stiffener is connected to the skin by a shortfiber reinforced filler. Although this type of connection performs very well in a pull-off loading (fracture loading is 10 times higher than welded connection), optimization is required regarding its impact performa...

Welding is an area in which technological developments out match the developments in its science base, which is primarily driven by the phenomenal industrial demand for welded structure. Reliability, Reproducibility and Viability requirements are forcing Technologists to look at weld defects such as distortion, hot cracking, in a systematic and logical approach than on adhoc basis. Distortion i...

An attempt made to optimize the operating parameters involved in an autogenous pulsed Nd: YAG laser welding process of similar and dissimilar combinations of butt joint of 2 mm thick 316 L stainless steel and mild steel. Influence of prominent laser welding parameters such as average peak power, defocus position, spot position, and shielding gas were investigated for welded joints considered. T...

The thermal shrinkage technique with previously proposed input parameter values for single-pass welding was applied to a multi-layer butt-welded joint four layers and six passes validate whether these parameters are applicable welded joints. out-of-plate displacement distributions of the obtained using were in good agreement those elastic-plastic analysis an experiment. angular distortion trans...