First-ply failure (FPF) of composite thin-walled columns and frames is investigated in the buckled structure. Elastic behavior is assumed during the pre-buckling and buckling states, and along part of the post-buckling equilibrium path. The Tsai-Hill criterion is employed to identify failure of one ply at one specific location. The technique of analysis is based on evaluation of the post-buckli...

The femoral head deteriorates in osteonecrosis. As a consequence of that, the cortical shell of the femoral head can buckle into the cancellous bone supporting it. In order to examine the buckling scenario we performed numerical analysis of a realistic femoral head model. The analysis included a solution of the hip contact problem, which provided the contact pressure distribution, and subsequen...

the current study presents a new analytical method for buckling analysis of rectangular and annular beams made up of functionally graded materials with constant thickness and poisson’s ratio. the boundary conditions of the beam are assumed to be simply supported and clamped. the stability equations were obtained by using conservation of energy. the critical buckling load and first mode shape we...

the current study presents a new analytical method for buckling analysis of circular plates with constant thickness and poisson’s ratio, made of functionally graded material subjected to radial load. governing equations are based on energy method for thin plates. the boundary conditions of the plate are assumed to be simply supported and clamped. the stability equations were obtained by using c...

Abstract: Consistent Imperfection Mode Method (CIMM) is a widely-used and effective numerical method to study the buckling capacity of spatial structure. CIMM used an “artificial” deformation instead of “artificial” load eccentricity to imitate the initial disturbance/imperfection for calculation of buckling load, and the basic mode obtained from linear buckling analysis could be used to simula...

This paper is concerned with the inelastic behavior of axially loaded concrete-filled thin-walled steel tubular columns subjected to local buckling. A nonlinear fiber element analysis program accounting for local buckling effects is developed for predicting the ultimate strength and ductility of concrete-filled thin-walled steel tubular columns. The effects of local buckling are taken into cons...

The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...

Many studies have measured the global compressive properties of tissue engineered (TE) cartilage grown on porous scaffolds. Such scaffolds are known to exhibit strain softening due to local buckling under loading. As matrix is deposited onto these scaffolds, the global compressive properties increase. However the relationship between the amount and distribution of matrix in the scaffold and loc...

Linear eigenvalue analysis of cracked cylindrical shells under combined internal pressure and axial compression is carried out to study the effect of crack type, size and orientation on the buckling behavior of cylindrical thin shells. Two types of crack are considered; through crack and thumbnail crack. Our calculations indicate that depending on the crack type, length, orientation and the int...

Metal thin-walled members have been widely used in building industry. Usually they are utilized as purlins, girts or ceiling beams. Due to slenderness of thin-walled cross-sections these structural members are prone to stability problems (e.g. flexural buckling, lateral torsional buckling). If buckling is not constructionally prevented their resistance is limited by buckling strength. In practi...