Zinc contaminated steelmaking by-products such as blast furnace (BF) dust and basic oxygen (BOS) present a significant recycling challenge at integrated plants. Rotary Hearth Furnaces (RHFs) provide an attractive route for recovery of Fe Zn from these materials through carbothermal reduction the oxides in material to yield Direct Reduced Iron (DRI) crude zinc oxide. The next generation RHF proc...

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

The investigation of electric arc furnace (EAF) steel slag as a viable add-on technology to existing stormwater systems for the removal of dissolved phosphorus (P) was extended to explore the effects of varying environmental and treatment system conditions. Parameters such as stormwater composition, P concentration, metal concentration, pH, temperature, slag mass and slag particle size were var...

EPA has completed a substantial study to re-evaluate use of the presence of slag wool fibers as a potential marker for World Trade Center (WTC)-derived dust contamination. Slag wool is an insulating material (made from blast furnace slag) that was used in the construction of the WTC. Large quantities of slag wool were released into lower Manhattan by the collapse of the WTC. Samples of dust col...

This study presents the result of using melting to recover both industrial sludge slag (the main constituent of which is calcium fluoride) and water works sludge slag as fine aggregate in cement. The main characteristics of both slag and cement mortars were measured to evaluate the feasibility of using slag as aggregate. In this study, the slag replacement ratios were 0, 10, 20, 30, 40, and 50%...

The dephosphorization slag has a great potential as the secondary resources of manganese and phosphorus, while quite a large amount of slag is landfilled and simply reused such as cement. The objective of this study is to investigate the recovery of manganese and phosphorus by wet magnetic separation technique. The hot metal pretreatment slag (dephosphorization slag) generally contains a Ca3P2O...

This paper focuses on research concerning the ecotoxicological properties of granulated slag from the pilot production of gray iron with red mud addition and concrete composites with the application of this slag. Red mud is a hazardous waste generated in the production of aluminium oxide. Negative ecotoxicological tests are, therefore, one of the basic prerequisites for the ability to use granu...

Some variables that influence the slag splashing phenomenon in an oxygen steelmaking converter are numerically analyzed in this work. The effect of lance height, jet velocity, jet exit angle and slag viscosity on the washing and ejection mechanisms of slag splashing is studied in this work employing twodimensional transient computational fluid dynamics simulations. A parameter here called avera...

Physical properties of molten slag such as viscosity, density and surface tension have a significant influence on the slag splashing process in an oxygen steelmaking converter. Particularly, viscosity determines the shear forces that rule droplets formation. Besides, stirring of the molten slag bath strongly depends on this property. In this work, the influence of viscosity on the efficiency of...

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...