The lowering of the groundwater table causes the area above the water table to become unsaturated and capillary phenomena to appear in this zone. This means that the bearing capacity of shallow footings will be influenced by capillary stress or matric suction. In this research, the effect of groundwater table lowering on the bearing capacity of a shallow square model footing on dense sand has b...

construction of railway embankments on loose beds without using any methods of soil improvement (e.g. stone columns in silt and clay beds, deep soil mixing method, jet grouting and also using micropiles individually or in groups form) leads to  reduction of embankment slope gradient, which significantly increases the volume of soil operation. generally, micropile as a reinforcing element with t...

An experimental study of the effect of silt and influence of cell confinement on the bearing capacity of circular footings on silty sand was carried out. Laboratory experiments on clean sand and sand containing silt up to 25 % were performed. Cells with different heights and diameters were used to confine the silty sand. The effect of proportion of silt in sand, cell diameter, cell height and t...

In this study, dynamic bearing capacity of adjacent shallow strip foundations located on sandy soil was examined using a numerical finite difference modeling, FLAC. The behavioral interference of shallow strip foundations under different conditions was investigated. The effect of soil strength parameters, geometric characteristics of shallow foundations and cyclic loads at different distance ra...

bearing capacity prediction of axially loaded piles is one of the most important problems in geotechnical engineering practices, with a wide variety range of methods which have been introduced to forecast it accurately. machine learning methods have been reported by many contemporary researches with some degree of success in modeling geotechnical phenomena. in this study, a fairly new machine l...

This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...

In the recent years, non-connected piled raft foundation has been considered as an economical and practical deep foundation in the situation that high shear and concentrated loads may occur at the connection of the raft and pile head. This paper was presented an experimental study of a square foundation on the effects of parameters such as S/D, L/D and etc. in two cases of connected or non-conn...

Soil reinforcement can be considered as the combination of two parts. One part is soil for compressive stress capacity and another part is some material such as geosynthetics such as steel belts and fibers for tensile stress capacity. Soil improvement is one of the useful methods to increase the strength parameters of the soil. The main goal of this study is to evaluate the effects of GFRP on t...

Determination of the pile capacity is always a major concern for the safe geotechnical engineering design. Different direct and indirect methods have been proposed for determining pile bearing capacity such as static and dynamic approaches. Each method depends on the condition of the soil and type of pile as well as accessibility to necessary information. In this study bearing capacity of drive...

in this paper, static performance characteristics for a finite lenght two-lobe journal bearing lubricated with micropolar fluid is studied. using finite element method, steady-state film pressure is obtained by solving modified reynolds equation, based on micropolar lubrication theory. with the help of film pressure in bearing, the static performance characteristics in terms of load carrying ca...