نتایج جستجو برای: base metal

تعداد نتایج: 448699  

In the present study, the microstructure of welded zone of Hastelloy X sheets with thickness of 1 mm via pulsed Nd-YAG laser welding were studied. This welding process was done by autogenus and conductive method. Microstructure were observed by metallurgical OM and SEM. Results shown Solidification of the weld metal is dendritic. The dendrites in the central zone of the welding are fine and equ...

Sabet, H., Razavi, S. H. , Siddiqui, M. ,

In this research  the effect of heat treatment offer welding (PWHT) in 650,750 and 8500C for two hours on Sulfide stress corrosion cracking resistance (SSC), welding metal Inconel 625 to low alloy steel 4130 was analyzed that was welded using Automatic TIG welding process then the mechanical properties of the joint was observed using micro hardness measure experiment (weld metal, base metal and...

Sabet, H., Razavi, S. H. , Siddiqui, M. ,

In this research  the effect of heat treatment offer welding (PWHT) in 650,750 and 8500C for two hours on Sulfide stress corrosion cracking resistance (SSC), welding metal Inconel 625 to low alloy steel 4130 was analyzed that was welded using Automatic TIG welding process then the mechanical properties of the joint was observed using micro hardness measure experiment (weld metal, base metal and...

ژورنال: Medical Laboratory Journal 2017
Chalabian, Firoozeh, Goudarziafshar , Hamid, Katouzian, Fatemeh, Rashki , Somayeh , Tamoradi, Taiebeh,

ABSTRACT         Background and objectives: Synthesis and characterization of several metal complexes (metal ions: Co2+, Ti4+ and Ce3+) of macroacyclic Schiff base ligand have been reported. The Schiff base ligand is prepared from the condensation reaction of 1, 4-di-(4-fluoro-2-aminophenoxy) butane with salicylaldehyde in ethanol. In addition, antibacterial ...

ژورنال: مجله دندانپزشکی 2004
خدادادی, رضا, رکنی, شهین, نجفی پور, محمد,

Statement of Problem: In order to eliminate the esthetic problem of metal collar in porcelain fused to metal crowns various techniques, such as shoulder porcelain, have been suggested. Purpose: The aim of this study was to investigate the effects of repeated porcelain firing cycles on the marginal integrity of shoulder in porcelain fused to metal crowns, made of two kinds of alloys: noble and b...

ژورنال: مجله دندانپزشکی 2005
استاد, سید ناصر, میرفضائلیان, علی , کندی بیدگلی, معصومه ,

Statement of Problem: One of newly presented base metal alloys (Minalux) is produced according to VeraBond2 alloy (Ni- Cr base) composition. Several studies showed that, cytotoxicity of base metal alloys can be occurred due to corrosion and element release. Purpose: This study evaluated the biocompatibility of these two base metal alloys in three steps: as cast, after polishing and after porcel...

Tahmasebi Manesh, Hossein, Nasresfahani, Alireza ,

One of the applications of P460NH micro-alloy steel is its use in pressure vessel tanks. Electrode E8018-G can be used for welding  this steel. In this study, to obtain the optimal welding parameters, the arc process based on ASME IX standard was used. Then, by sampling from the weld section, Vickers hardness test was performed and hardness profiles were drawn in different areas. Then the micro...

Journal: :international journal of iron & steel society of iran 2012
i. hajiannia m. shamanian m. kasiri

in the present study, the corrosion behavior of aisi 347 austenitic stainless steel to astm a335 low alloysteel dissimilar joint was investigated. for this purpose, two filler metals, er309l and ernicr-3, were selected to be used during the gas tungsten arc welding process. to investigate the corrosion behavior of the joints after welding, the specimens were tested in 3.5% sodium chloride solut...

In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...

Tahmasebi Manesh, Hossein, Nasresfahani, Alireza ,

One of the applications of P460NH micro-alloy steel is its use in pressure vessel tanks. Electrode E8018-G can be used for welding  this steel. In this study, to obtain the optimal welding parameters, the arc process based on ASME IX standard was used. Then, by sampling from the weld section, Vickers hardness test was performed and hardness profiles were drawn in different areas. Then the micro...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید