tio2 nanorods are synthesized by a thermal corrosion. in present work, synthesis of tio2 nanorods in anatase, rutile and ti8o15 phases, by using the sol-gel method and alkaline corrosion are reported. the morphologies and crystal structures of tio2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and x-ray diffractometer techniques. the o...

-

Articles you may be interested in Adhesive-free colloidal probes for nanoscale force measurements: Production and characterization Rev. Improved in situ spring constant calibration for colloidal probe atomic force microscopy Rev. Accurate noncontact calibration of colloidal probe sensitivities in atomic force microscopy Rev. A calibration method for lateral forces for use with colloidal probe f...

TiO2 nanorods are synthesized by a thermal corrosion. In present work, synthesis of TiO2 nanorods in anatase, rutile and Ti8O15 phases, by using the sol-gel method and alkaline corrosion are reported. The morphologies and crystal structures of TiO2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and X-ray diffractometer techniques. The o...

bismuth sulfide nano-rods and nano-flowers were synthesized via a hydrothermal reaction at a relatively low temperature. thioglycolic acid is used as sulfur source and capping agent simultaneously. bi2s3 nanostructures were then added to acrylonitrile-butadiene-styrene (abs) copolymer. the thermal stability behavior of abs filled with bismuth sulfide nano-rods were investigated by thermogravime...

Noncontact atomic force microscopy (NC-AFM) is being increasingly used to measure the interaction force between an atomically sharp probe tip and surfaces of interest, as a function of the three spatial dimensions, with picometer and piconewton accuracy. Since the results of such measurements may be affected by piezo nonlinearities, thermal and electronic drift, tip asymmetries, and elastic def...

The radiative properties of patterned silicon wafers have a major impact on the two critical issues in rapid thermal processing (RTP), namely wafer temperature uniformity and wafer temperature measurement. The surface topography variation of the die area caused by patterning and the roughness of the wafer backside can have a significant effect on the radiative properties, but these effects are ...

A HfSiO4 ceramic was prepared by a conventional solid state synthesis method by sintering at 1600 °C. The morphology of the sintered surface was characterized using scanning electron microscopy and atomic force microscopy and the average surface roughness was about 118 nm. The sintered HfSiO4 ceramic has εr = 7.0, Qu × f = 25 000 and τf = -44 ppm °C(-1) at 10 GHz. It exhibits promising thermal ...

Chromium oxide (α-Cr2O3) thin films were prepared using thermal annealing of chromium (Cr)films deposited on quartz substrates by direct current (DC) magnetron sputtering. The annealingprocess of the films was performed for different times of 60, 120,180 and 240 min. The influenceof annealing time on structural, morphological and optical properties of the prepared films wasinvestigated by diffe...