This paper presents a degradation-based procedure for estimating the full and residual lifetime distribution of a single-unit system subject to Markovian deterioration. The hybrid approach unites real degradation measures with analytical, stochastic failure models to numerically compute the distributions and their moments. Two distinct models are shown to perform well when compared with simulat...

In the present investigation, an attempt has been made to use “exponential model” in the prediction of fatigue life without integrating the fatigue crack growth rate curve (FCGR). The obtained results are compared with experimental crack growth data obtained for 2024-T351 aluminum alloy for four bending V-Charpy specimens under constant amplitude loading in stress ratio range from 0.1 to 0.3 an...

in this study, aluminium2024- graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (samd) technique which resulted in production of al/gr powder mixtures which subsequently consolidated and sintered for preparation of al/gr composites. in this technique, powder mixture was prepared by addition of flake graphite (mean diam...

The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar ...

The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...