SiC-reinforced aluminum matrix composites (SiCp/Al composites) are typically difficult-to-machine material, and the irregular SiC diffused in SiCp/Al make surface quality worse. In this paper, a single-point cutting simulation with variable plane depth were conducted for composite higher volume fraction (65 Vol%) alloy. The morphology characteristics of composites, which mainly include breaking...

In this work, a novel processing method called powder thixoforming was proposed to prepare composites reinforced with 50 vol % of SiC particles (SiCp) that were used for electronic packaging in order to investigate the effects of remelting duration on its microstructure and properties. Optical Microscope (OM), Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and Transmission Electron...

metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

The SiC particles (SiCp, mass fraction 30 %) reinforced with the Al-Si-Cu-Mg matrix composite have been prepared using one-way press method, sintering, and hot extrusion. The composite was subjected to solid solution treatment at temperatures of 470 °C, 485 °C, 500 °C, 515 °C, and 530 °C for 4 h. The sample was then subjected to ageing treatment at temperatures of 160 °C and 180 °C during diffe...

Magnesium metal matrix composites (Mg MMCs) possess relatively more favorable mechanical properties than Mg alloys because they add reinforcements, such as small particles, short fibers, or continuous fibers, into the matrix. This study investigated the influence of adding different sizes and percentages of silicon carbide particles (SiCp) for manufacturing AZ61/SiCp Mg alloy composite extrusio...

The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiCp/Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiCp/Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activ...

The effect of deep cryogenic treatment (DCT) on the artificial ageing kinetics a SiC particles reinforced aluminum alloy composite (SiCp-Al) is experimentally studied in this paper. evolutions both macro-properties (i.e., yield strength and ultimate tensile strength) microstructures (precipitates) have been investigated by set hardness tests, microstructural observations (scanning electron micr...

Metal matrix composites (MMCs) are now gaining their usage in aerospace, automotive and biomedical industries because of their inherent properties like high strength to weight ratio, low wear rate etc. To machine these types of materials conventional machining methods are unsuitable because of high tool wear and tooling cost. Electro discharge Machining (EDM) is one of the important nontraditio...