in this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the sari region. the bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. after determining the optimum calcination conditions in 1 h at 900 °c, the response surface methodology (rsm) with four factors in...

In this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the Sari region. The bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. After determining the optimum calcination conditions in 1 h at 900 °C, the response surface methodology (RSM) with four factors in...

Quasi-dynamic leaching characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from raw and solidified air pollution control (APC) residues were examined via a nine-time multiple leaching test. The effect of injected activated carbon in the APC residues on the PCDD/F leachability was also evaluated. When humic acid solution was used as a leachant, the leaching concentra...

an approach to recycle precious metals of cathode materials from spent lithium cobalt oxide batteries by using organic citric acid and hydrogen peroxide has been studied in this paper. the effects of molar ratio, solid-liquid ratio, reaction time and temperature on leaching efficiency of cobalt were investigated respectively. meanwhile the leaching kinetics equation of cobalt was established, a...

Leaching mechanism of zinc oxide is important not only to understand zinc smelting process but also to develop of new zinc recycling process. Recycling of zinc is mainly done by treatment of electric arc furnace dust (EAF dust). In Japan pyro metallurgical process is enhanced for EAF dust treatment, however only zinc oxide can be recovered by pyro metallurgical process. Hydro metallurgical proc...

Reductive leaching was used to dissolve metals, especially cobalt, present in Fars Tidar mine,. In this paper, cobalt ore was leached with sulphuric acid in the presence of phenol to determine the effects of various factors on leaching. These factors included temperature, acid concentration, time, phenol content, pulp density, and interaction between some of the parameters. The results indicate...

Reductive leaching was used to dissolve metals, especially cobalt, present in Fars Tidar mine,. In this paper, cobalt ore was leached with sulphuric acid in the presence of phenol to determine the effects of various factors on leaching. These factors included temperature, acid concentration, time, phenol content, pulp density, and interaction between some of the parameters. The results indicate...

The leaching kinetics of a low-grade zinc oxide ore in different acid media was investigated with respect to the experimental variables including acid concentration, temperature, liquid to solid (L/S) ratio, and stirring speed. The results obtained showed that the leaching reagent concentration and the reaction temperature exerted significant effects on the extraction of zinc, whereas the L/S r...

titanium dioxide is widely used in the manufacturing of paints, varnishes, lacquer, paper, paperboard, printing inks, rubber, floor covering, and ceramics and so on. white titanium dioxide pigment has been produced by two main processes. the sulfate and the chloride processes. each of these two routes requires different feedstocks. however, economic and environmental pressures are shifting the ...