A steel has recently been designed to benefit from the deformation induced transformation of retained austenite present in association with bainitic ferrite. It has as its major microstructural component, dendrites of d-ferrite introduced during solidification. The d-ferrite replaces the allotriomorphic ferrite present in conventional alloys of this kind. The authors examine here the stability ...

The ferrite plating a method synthesizing ferrite films from an aqueous solution -has developed lately as follows; (1) Applying power ultrasound to aqueous solution improves the qualities of ferrite coating on polymer microspheres much, (2) similarity is found between mechanisms of the ferrite plating and bacterial FesO4 ( magnetsome) synthesis, (3) using highly alkaline (pH=13) solution contai...

Abstract—Miniaturized ferrite ring patch antennas (RPAs) were designed and fabricated for multiple-input multiple-out (MIMO) applications. Design parameters of higher-order mode ferrite RPAs, 1-RPA and 2-RPA, were optimized, and antenna performance of the ferrite 1-RPA was evaluated. The Z-type hexaferrite and 2%-weight borosilicate glass composite was used for the ferrite antenna disk. The mea...

Appropriate addition of CuO/V2O5 and the reduction of the granularity of the raw materials particle decrease the sintering temperature of NiZn ferrite from 1200 degrees C to 930 degrees C. Furthermore, the magnetic properties of the NiZn ferrite prepared at low temperature of 930 degrees C is superior to that of the NiZn ferrite prepared by sintering at high temperature of 1200 degrees C becaus...

This report describes the synthesis of an antibacterial material consisting of a gemini quaternary ammonium salt (gemini-QUAT) immobilized on ferrite powder, and its antibacterial activity. A gemini-QUAT containing two pyridinium residues per molecule, 4,4'-[1,3-(2,2-dihydroxylmethyl-1,3-dithiapropane)]bis (1-octylpyridinium bromide), was immobilized on ferrite powder by a reaction between the ...

Due to the interesting magnetic and electrical properties with good chemical and thermal stabilities, nickel ferrite nanoparticles are being utilized in many applications including magnetic resonance imaging, drug delivery and hyperthermia. Recent studies have shown that nickel ferrite nanoparticles produce cytotoxicity in mammalian cells. However, there is very limited information concerning t...

This paper presents modeling of the complex permeability spectra, fabrication and a wide frequency range characterization of a toroidal LTCC ferrite sample. A commercial ferrite tape ESL 40012 is used, and standard LTCC (Low Temperature Co-fired Ceramic) processing has been applied to the sample fabrication. The characterization was performed using a short coaxial sample holder and a vector net...

A ferrite-dielectric metamaterial composed of dielectric and ferrite cuboids has been investigated by experiments and simulations. By interacting with the electromagnetic wave, the Mie resonance can take place in the dielectric cuboids and the ferromagnetic precession will appear in the ferrite cuboids. The magnetic field distributions show the electric Mie resonance of the dielectric cuboids c...

The microstructure obtained as the weld cools from the liquid phase to ambient temperature is called the as–deposited or primary microstructure. Its major components include allotriomorphic ferrite, Widmanstätten ferrite, and acicular ferrite (Fig. 1). There may also be some martensite, retained austenite or degenerate pearlite. These latter phases occur in very small fractions, and are known b...

Nanocrystalline ~NC! ferrite powders have been synthesized using a 50 kW–3 MHz rf thermal plasma torch for high-frequency soft magnet applications. A mixed powder of Ni and Fe (Ni:Fe 51:2), a NiFe permalloy powder with additional Fe powder (Ni:Fe51:2), and a NiFe permalloy powder (Ni:Fe51:1) were used as precursors for synthesis. Airflow into the reactor chamber was the source of oxygen for oxi...