نتایج جستجو برای: abrasion resistance
تعداد نتایج: 378470 فیلتر نتایج به سال:
-Hardfacing is one of the most useful and economic ways to improve the performance of components submitted to severe wear conditions. A study was made to compare the microstructure and abrasion resistance of hardfacing alloys reinforced with primary chromium carbides, the hardfacing alloys were deposited onto M.S. plate by SMAW process. Two different commercial hardfacing electrodes were employ...
The piston ring which prepares mechanical sealing of a combustion chamber, should have significant abrasion resistance and less friction loss, using appropriate ring coating. The coating widely used is CrN, because of its good abrasion resistance at room temperature. However, it suffers from some shortcomings, such as high abrasion rate at temperatures above 200°C and lack of self-lubricating p...
The opinions, findings, and conclusions expressed in this publication are those of the principal investigators and the Missouri Department of Transportation. They are not necessarily those of the U.S. Department of Transportation, Federal Highway Administration. This report does not constitute a standard or regulation. ii ABSTRACT The main objective of this study was to determine the effect on ...
Context: Nanocomposites are becoming popular today because of the manufacturers claiming high surface smoothness and good abrasion resistance properties thus improving the longevity of the restoration. Aims: This in vitro study was carried out to investigate the effect of nanofillers on surface roughness and abrasion resistance of nanofilled compositeFiltek Z350 (3M ESPE) and nanohybrid composi...
Abrasion susceptibility of highway pavements has a great impact on the skid resistance, and consequently accident rate. A rotational abrasion device is introduced, providing the advantage of field simulation of wheel passage, in comparison with existing standard methods. The device was used to measure abrasion susceptibility of concrete pavements with different textures. The obtained results we...
The wear of cental amalgam was studied by single- and double-pass sliding and by a silicon carbide abrasion test. A dispersed amalgam showed significantly better resistance to two-body abrasion than the spherical amalgams tested. The wear amalgam was determined by resistance to penetration and by a ductile mode of surface failure over the load range studied. Differences in the wear of amalgam a...
the blending of nr and br rubber blend with n330 carbon black is studied on curing behavior and the physico-mechanical properties of a sbr rubber based tire tread compound containing n234 carbon black. the effect of sulphur and accelerator contents on different properties of rubber compound is also tested with a wide range of curing agents. partial substitution of sbr with nr shows significant ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید