We have demonstrated a flexible resistive random access memory unit with trilayer structure by atomic layer deposition (ALD). The device unit is composed of Al2O3/HfO2/Al2O3-based functional stacks on TiN-coated Si substrate. The cross-sectional HRTEM image and XPS depth profile of Al2O3/HfO2/Al2O3 on TiN-coated Si confirm the existence of interfacial layers between trilayer structures of Al2O3...

Al2O3 doped Ba0.5Sr0.5TiO3 ~BST! thin films, with different Al2O3 contents, were deposited on ~100! LaAlO3 substrates by the pulsed laser deposition technique to develop agile thin films for tunable microwave device applications. The dielectric properties of Al2O3 doped BST films were determined with a nondestructive dual resonator near 7.7 GHz. We demonstrated that the Al2O3 doping plays a sig...

Low temperature fabrication of Al2O3-polyimide composite substrates was carried out by an aerosol deposition process using a mixture of Al2O3 and polyimide starting powders. The microstructures and dielectric properties of the composite thick films in relation to their Al2O3 contents were characterized by X-ray diffraction analysis. As a result, the crystallite size of α-Al2O3 calculated from S...

Disperse fine equiaxed α-Al2O3 nanoparticles with narrow size distribution are important materials in nanotechnology and nanomaterials, but syntheses of disperse fine equiaxed α-Al2O3 nanoparticles usually result in fine γ-Al2O3 nanoparticles or large α-Al2O3 nanoparticles larger than 15 nm. α-Al2O3 has a higher surface energy than γ-Al2O3 and becomes thermodynamically not stable with respect t...

Five monolithic catalysts with low noble metal content were prepared by immerge method (Pt/gamma-Al2O3, Pt/La-Al2O3, Pt/YSZ-Al2O3, Pt+Pd/La-Al2O3 and Pd/La-Al2O3) and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking f...

By varying the ratio of the constituents, compound films can exhibit a widely tunable range of physical properties. Atomic layer deposition ~ALD! techniques are based on sequential, self-limiting surface reactions and can grow compound films. In this study, ZnO/Al2O3 alloy films were prepared using ALD techniques. By adjusting the ALD pulse sequence, the ZnO/Al2O3 alloy film composition was var...

Triboluminescence (TL) is an optical phenomenon that has a long and varied history with broad applications, such as damage detection, X-ray source, and mass health monitoring sensor. So far, the properties and mechanisms of TL remain not completely understood. The TL properties emitted during the sliding contact between Al2O3 and SiO2 surfaces were studied along different crystallographic orien...

the no removal over oxide sorbents (k2o/al2o3 , cao/al2o3 and bao/al2o3) at a loading of up to 25 wt.% was investigated using a synthetic diesel exhaust gas containing  1,000 ppm no, 1000 ppm iso-butane (i-c4h10), 8% o2 and n2 balance. the reactor was operated  at 250 oc to 450 oc for the activity study. no was effectively stored (removal efficiencies between 30-60 %) as nitrate under experimen...

in this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (ch45) produced by the algerian firm refractal.the investigated properties are setting time, water consumption, electrical conductivity, ph, density and the compressive strength. the results show a setting time of about 200 min for the acid free, 180 min with 0.1 % of carboxylic ...

Alumina (Al2O3) decorated anatase TiO2 nanotubes with ordered mesoporous pore walls (Al2O3/meso-TiO2 nanotubes) are successfully synthesized through vacuum pressure induction technology, and then combined with the thermal decomposition of a mesoporous TiO2 sol precursor, inside the cylindrical nanochannels of an anodic aluminium oxide (AAO) template. The decorated Al2O3 was formed by in situ de...