The application of conductive coatings on ferritic stainless steel can decrease electrical conductivity. Theaim of this research was to investigate the electrical conductivity of cobalt coated AISI 430 ferritic stainlesssteel by pack cementation technique. Coated coupons were analyzed using scanning electron microscopy(SEM). Electrical conductivity of the coated substrates was measured as a fun...

Implantation using stainless steels (SS) is an example where an understanding of protein-induced metal release from SS is important when assessing potential toxicological risks. Here, the protein-induced metal release was investigated for austenitic (AISI 304, 310, and 316L), ferritic (AISI 430), and duplex (AISI 2205) grades in a phosphate buffered saline (PBS, pH 7.4) solution containing eith...

The present study focused on stress corrosion cracking (SCC) and corrosion behavior of ferritic stainless steel (grade 430) in activated methyl diethanolamine (aMDEA) solution, which is classified as a tertiary amine. In this regard, cyclic polarization and U-bend tests were performed in CO2 loaded aMDEA with different concentrations at 25 and 70 °C to observe corrosion behavior and ...

In this study, thermal fatigue properties of 400 series ferritic stainless steels have been evaluated in the temperature ranges of 200-800C and 200-900C. Systematic methods for control of temperatures within the predetermined range and measurement of load applied to specimens as a function of temperature during thermal cycles have been established. Thermal fatigue tests were conducted under ful...

Thin AISI 430 ferritic stainless steel sheets containing 18% Cr were hardened by continuous-wave laser beams under different conditions. A symmetric double treatment platform was developed to operate two lasers simultaneously in order achieve a homogenous microstructure through the specimen and avoid overheating associated with single treatments on one surface. The influence of linear energy de...

Disinfectants play an important role in controlling microbial contamination on hard surfaces in hospitals. The effectiveness of disinfectants in real life can be predicted by laboratory tests that measure killing of microbes on carriers. The modified Quantitative Disk Carrier Test (QCT-2) is a standard laboratory method that employs American Iron and Steel Institute (AISI) Type 430 stainless st...

In the present work, a high power Nd:YAG laser has been employed to weld AISI 430 ferritic stainless steel thin sheets. Optical microscopy was used to study the microstructural evolutions during laser welding. Tensile test and microhardness measurement were employed in order to investigate the mechanical behaviors of welds. Also, vibrational sample magnetometry was used for characterizing magne...

in order to enhance the performance of interconnects which are used in solid oxide fuel cells (sofcs), a protective/conductive coating can be applied. in this research aisi 430 ferritic stainless steel was coated in a mn-base pack mixture by pack cementation method. in order to evaluate the oxidation behavior, isothermal oxidation was accomplished for 200 h at 800 ºc. electrical behavior was al...

the present article considers the nd:yag pulsed laser welding of 304 stainless steels with two different compositions. the effects of various laser operational parameters and cooling rates on the weld microstructures were considered. the results show that ferritic solidification is produced in the stainless steel with the creq/nieq ratio of 1.7, and austenitic solidification is produced in the ...