The microstructure of melt extracted Ti-44Al-8Nb-0.2W-0.2B-1.5Si fiber were investigated. When the rotation speed increased from 2000 to 2600 r/min, the appearance of the wire was uniform with no Rayleigh-wave default. The structure was mainly composed of fine α₂ (α) phase dendritic crystal and a second phase between dendrite arms and grain boundaries. The precipitated second phases were confir...

First-principles electronic structures were used to compute the lattice and elastic constants of single-crystal TiB and NbB and changes with Nb, Ti, Al and V solutes. The data were built into an interpolation formula for lattice and elastic constants of the quartenary (TiNbAlV)B with dilute Al and V concentrations. The lattice and elastic constants of borides in two Ti alloys containing Nb and ...

TiB-reinforced Ti–3Al–2.5V, in which the TiB whiskers are oriented parallel to direction of heat extrusion, was fabricated via powder metallurgy. To investigate effects whisker volume fraction on fatigue properties four-point bending tests were conducted plate-type specimens having varying and orientation. The limit life Ti–3Al–2.5V that loading tended be increase with increasing fraction, wher...

In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...

In-situ TiB whisker-reinforced Ti-6Al-4V (TC4) titanium matrix composites (TiBw/TC4) with quasi-continuous networks were successfully fabricated by vacuum hot-pressing sintering. The effects of the hot-hydrostatic canned extrusion on stock utilization, microstructure and mechanical properties of the TiBw/TC4 composites were investigated. It was satisfactory that the utilization of composites co...

1 Assistant Professor, Department of Mechanical and Aeronautical Engineering; Graduate student, Professor and Professor, respectively, Department of Chemical Engineering and Materials Science, University of California, One Shields Avenue, Davis, CA 95616. 2 Assistant Professor, Department of Civil and Environmental Engineering, University of Illinois, Urbana IL 61801-2352. Abstract: This paper ...

The technology of the TiB2/TiB cladding layer addresses issue insufficient wear resistance cup-shaped parts composed titanium alloy materials. In order to eliminate cracking problem laser TiB2/Ti-based alloy, 30%TiB2/Ti-based gradient coating was prepared on surface by in this study. results revealed that microstructure matrix and is metallurgically bonded. microstructures appear as rod-like co...