The SiC particles (SiCp, mass fraction 30 %) reinforced with the Al-Si-Cu-Mg matrix composite have been prepared using one-way press method, sintering, and hot extrusion. The composite was subjected to solid solution treatment at temperatures of 470 °C, 485 °C, 500 °C, 515 °C, and 530 °C for 4 h. The sample was then subjected to ageing treatment at temperatures of 160 °C and 180 °C during diffe...

The high cost of fabrication hindered the actual application of metal matrix composite (MMC) despite of their high stiffness, strength, corrosion resistance, wear resistance, non-reactivity with chemicals and so many other tailored quality which are never obtained in alloy of metals. In this study, a modest attempt has been made to find out the process parameters at which best mechanical proper...

The effect of deep cryogenic treatment (DCT) on the artificial ageing kinetics a SiC particles reinforced aluminum alloy composite (SiCp-Al) is experimentally studied in this paper. evolutions both macro-properties (i.e., yield strength and ultimate tensile strength) microstructures (precipitates) have been investigated by set hardness tests, microstructural observations (scanning electron micr...

Magnesium metal matrix composites (Mg MMCs) possess relatively more favorable mechanical properties than Mg alloys because they add reinforcements, such as small particles, short fibers, or continuous fibers, into the matrix. This study investigated the influence of adding different sizes and percentages of silicon carbide particles (SiCp) for manufacturing AZ61/SiCp Mg alloy composite extrusio...

Nano-SiC particulates (n-SiCp) reinforced Mg-8Al-1Sn (AT81) composites with different pre-oxidation parameters were fabricated by powder metallurgy (P/M) process combined with hot extrusion. The effects of pre-oxidization treatment of n-SiCp on the microstructure and tensile properties of 0.5 vol % n-SiCp/AT81 composites were investigated accordingly. The distribution of n-SiCp with different p...

Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...

A dense Al-SiCp nanocomposite coating with high volume fraction of nano SiCp reinforcement (60 vol.%) was fabricated through cold spraying deposition milled Al-60SiCp powder in the present paper. Microstructure evolution during ball milling process, microstructure characteristics and hardness sprayed were studied. Al particles underwent fracture deformation SiC evenly distributed soft base mate...

Salmonella typhimurium uses of a type III protein secretion system encoded at centisome 63 of its chromosome to deliver effector molecule into the host cell. These proteins stimulate host cell responses such as reorganization of the actin cytoskeleton and activation of transcription factors. One of these effector proteins is SptP, a tyrosine phosphatase that causes disruption of the host cell a...

The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...