The aim of the work reported in this article was to investigate the effects of medium temperature and industrial by-products on the key hardened properties of high performance concrete. Four concrete mixes were prepared based on a water-to-binder ratio of 0.35. Two industrial by-products, silica fume and Class F fly ash, were used separately and together with normal portland cement to produce t...

Microsilica, or silica fume, is an amorphous type of silica mostly collected as byproduct of the silicon and ferrosilicon alloy production. In this work, low shrinkage alumina-mullite ceramic composites were prepared from mixtures of calcined alumina, silica fume and aluminum metal powder and sintered at 1550 o C for 2 hrs. The influence of silica fume and aluminum powder on the densification p...

A number of commercially available air cleaners designed for use against solder fume have been examined. The fume capture efficiencies have been measured with a tracer gas comprising a neutrally buoyant mixture of sulphur hexafluoride and helium, and the filtration efficiencies have been measured using solder fume produced at a constant concentration, laboratory-generated monodisperse aerosols,...

Silica fume (SF) and Metakaolin are cementitious materials used as admixtures to produce high strength concrete and to reduce the permeability. Also, Silica fume is used to make durable concrete structures in combination with ordinary Portland cement. In places where insufficient or poor curing concrete structures like sea shores, underground structures which undergo severe loss of compressive ...

The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...

The tensile strength of cement paste was increased by 56% and the modulus and ductility were increased by 39% by using silane-treated carbon fibers and silane-treated silica fume, relative to the values for cement paste with as-received carbon fibers and as-received silica fume. Silane treatment of fibers and silica fume contributed about equally to the strengthening. Silane treatment of fibers...