In this paper, the performance of the cutting tool with nanocrystalline multilayer coatings (TiN+TiAlN) for machining of superalloy Inconel 718 in the dry and wet conditions was studied. The multi layer TiN and TiAlN with nanocrystalline structure was applied by physical vapor deposition technique (arc evaporation) on the WC-Co inserts. The results of the ball on disc wear test and the machinin...

To qualify high-entropy alloys (HEAs) as resource-saving and high-temperature wear-resistant coating materials, high-velocity oxygen fuel (HVOF) coatings produced from the inert gas-atomized powder of Al0.3CrFeCoNi, Al0.3CrFeCoNiNb0.5 Al0.3CrFeCoNiMo0.75 were investigated in reciprocating wear tests at temperatures 25, 500, 700 900 °C. In addition to tests, microstructure chemical composition t...

Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...

Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...

Materials can be subjected to severe wear and corrosion due high temperature, pressure mechanical loads when used in components for the production of geothermal power. In an effort increase lifetime these thus decrease cost maintenance High-Entropy Alloy Coatings (HEACs) were developed with different coating techniques anti-wear properties. The microstructure, tribological properties CoCrFeNiMo...

The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...

The aim of the present study was to investigate the effect of quenching and tempering temperatures on the microstructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistant steel. In addition, the dominant wear mechanisms were studied. For this purpose, austenitizing and tempering temperatures were selected in the ranges of 900- 1000 °C and 300- 500...

Fe60 laser cladding coating was prepared on the surface of 45 steel with assistance alternating magnetic field–mechanical vibration coupling field. The XRD results show that is mainly composed solid solution Ni-Cr-Fe, (Fe, Ni), and Fe-Cr also contains a certain amount Cr2Fe14C hard phase. In process cladding, chemical composition not affected by Under interaction field, liquid metal in molten p...

  There are many factors such as voltages, duty cycle, pressure, temperatures and gas flux in coatings process that were effective in changing coatings characteristic. In this paper in plasma enhanced chemical vapor deposition (PECVD) technique, temperature and gas flux are two important variants that affecting the coatings structure and mechanical properties. All TiC coating deposited on a hot...