The effects of accelerated aging on a pigmented elastomer were evaluated by using a weathering chamber. Silastic 44210, a maxillofacial material with proven color and physical property stability, was chosen for pigmentation with 11 maxillofacial pigments. The values of ultimate tensile strength, maximum percent elongation, shear strength, Shore A hardness, and permanent deformation were determi...

aisi 4340 steel is one of the super strong steels that can be selected for different applications. by designing theproper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. in thisstudy, different heat treatment cycles were introduced to achieve the optimum microstructure and improve themechanical and magnetic properties of aisi 4340 steel. the re...

bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. this microstructure has shown ultimate tensile strength of about 2.2 gpa, noticeable uniform elongation in the range of 5 to 30%, hardness values of about 600 to 670 hv and impact toughness in the range of 30 to 40 mpa m1/2. with ca...

the spot welding is widely used for joining thin sheets in different industries; such as automotive industry. this method of welding is very easy to automate and maintain. in this study, the effect of nugget diameter on the tensile-shear strength of the spot welding joints was investigated. the specimens were manufactured from aisi 1008 hr sheets with 1.0 mm thickness. the eight different elect...

Various experimental studies have been carried out on glass fiber reinforced concrete (GFRC), but in limited studies, the behavior of this type of concrete is evaluated using finite element method (FEM). In this study an analysis model is presented for predicting energy absorption capacity of glass fiber reinforced self-compacting concrete (GFRCSCC) beams and the results are compared with exper...

In the present study, parameters of tool rotation speed, tool travel speed and tool offsetting with different levels were used in the friction stir welding (FSW) of aluminum-copper tailor welded blanks (TWBs). The FSW of pure copper to 5052 aluminum alloy were carried out by varying tool rotation speed from 800 rpm to 1200 rpm, tool travel speed from 40 mm/min to 80 mm/min and tool offsetting f...

Epoxy and dicyclopentadien (DCPD) are two common healing agents, which are introduced into epoxy matrix through encapsulation in order to prepare self-healing composites. In a comparative study, the compatibility of healing agents and epoxy matrix is investigated through experimental tests and DFT calculations. The interaction energy is considered to be the determinative parameter in DFT calcul...

the marble slurry wastes (msw) produced by marble industry is left unattended in theenvironment which causes serious environmental problems. in order to evaluate its potential usage in normal1:2:4 concrete, this study was designed, where the partial replacement of cement with msw was examined.replacement of cement with msw from 0 to 100%, and also its usage as an additive material 10% and 20% b...