In this work, the bending fracture process of a stress biased piezoelectric composite actuator (PCA) under a three-point bending load have been characterized with the aid of acoustic emission (AE) monitoring. The AE signal from the monolithic PZT wafer at the maximum bending load shows the characteristics of high amplitude and long duration with a low dominant frequency band confirmed by a fast...

Achieving vibration and/or wave attenuation with locally resonant metamaterials has attracted a great deal of attention due to their frequency dependent negative effective mass density. Moreover, adaptive phononic crystals with shunted piezoelectric patches have also demonstrated a tunable wave attenuation mechanism by controlling electric circuits to achieve a negative effective stiffness. In ...

Using a two-dimensional (2D) photonic-crystal slab structure, we have demonstrated a strong 2D photonic band gap with the capability of fully controlling light in all three dimensions[1]. Our demonstration confirms the predictions [2] on the possibility of achieving 3D light control using 2D band gaps, with strong index guiding providing control in the third dimension, and raise the prospect of...

A system identification problem is investigated for high-rise buildings to identify the story stiffnesses of a shear-bending model (SB model). In the previously proposed stiffness identification method due to the present authors, the shear and bending stiffnesses of the SB model were identified by means of the subspace and inverse-mode methods. The lowest mode of horizontal displacements and fl...

objective: this in vitro study evaluated the fracture strength and bending amount of twotypes of fiber reinforced composite (frc) and cast metal frameworks used for fabrication of inlay fixed partial dentures (ifpds). materials and methods: seventy-two extracted first maxillary premolars and molars (36 each) were embedded in acrylic resin to represent a missing of second maxillary premolar. frc...

Plasmonic waveguides made of metal nanowires (NWs) possess significant potential for applications in integrated photonic and electronic devices. Energy loss induced by bending of a NW during light propagation is critical in affecting its performance as a plasmonic waveguide. We report the characterization of the pure bending loss in curved crystalline silver NW plasmonic waveguides by decouplin...

Abstract We present a simple discrete formula for the elastic energy of a bilayer. The formula is convenient for rapidly computing equilibrium configurations of actuated bilayers of general initial shapes. We use maps of principal curvatures and minimum-curvature direction fields to analyze configurations. We find good agreement between the computations and an approximate analytical solution fo...

This paper reports the experimental investigation of the durability of screen printed conductor-based strain gauges on four fabrics of different stiffness by examining the change in the electrical resistances during and after bending. Emphasis is placed on improving the durability of the gauges for both positive and negative bending e-textile applications. The electrical resistance of the print...

This paper explores the mechanism of bending with kinking of a long single-walled carbon nanotube under pure bending with moderate bending angles. The prebuckling response was modeled using the existing continuum mechanics theory accounting for the ovalization of the cross section. The post-buckling behavior was characterized by the development of an elastic kink mechanism, considering the van ...

In this Letter, we demonstrate a compellingly simple directional bending sensor based on multicore optical fibers (MCF). The device operates in reflection mode and consists of a short segment of a three-core MCF that is fusion spliced at the distal end of a standard single mode optical fiber. The asymmetry of our MCF along with the high sensitivity of the supermodes of the MCF make the small be...