The wide applicability of titanium (Ti) has prompted the analysis to improve its mechanical strength through addition different alloying elements. Among these, Ti materials with pre-mixed pure and nitride (TiN) powders as starting have exhibited improved properties tribological performance. In this study, matrix composites ring-shaped TiN dispersoids were evaluated. fabricated from powder core–...

The present paper describes the results of tests on the influence of human saliva and its substitutes on tribological characteristics of implant materials on the example of the Ti-6Al-4V (a-Ti) titanium alloy. The saliva substitutes were prepared on the basis of pyrophosphates and mucins dissolved in saline buffer. The results of the presented tribological tests show that the values of the para...

Most polymeric tribological components are inherently insulative, resulting in susceptibility to failure from frictional heating at the PV limit, which is typically reported as a product of the heat flux terms pressure (P) and sliding speed (V). This letter reports on the design of a tribological composite for increased thermal conductivity and PV limit. The control sample is an unfilled compos...

We have studied the effects of silane coupling agents used for the surface treatment of fiber on the tribological properties of hemp fiber (HF) reinforced plant-derived polyamide 1010 (PA1010) biomass composites. Hemp fibers were surface-treated by two surface treatment methods: (a) alkali treatment by sodium hydroxide solution and (b) surface treatment by silane coupling agents. Three types of...

Development of new generation bio-tribological, multilayer coatings opens an avenue for fabrication of future hightech functional surfaces. In the presented work, nano-composite, Cr/CrN+[Cr/ a-C:H implanted by metallic nanocrystals] multilayer coatings have been developed for surface protection of medical tools. Thin films were fabricated by a hybrid Pulsed Laser Deposition technique. Complex m...

The oral aesthetic medicine has contributed increasingly to correct aesthetic defects in order to respond to the standards of beauty imposed by society. A smile with white teeth is included in these standards. However, due to several factors, such as diet, age and certain vices, the natural color of teeth tends to change. The bleaching of teeth pretends to restore the original color of the teet...

Laser surface texturing has been successfully applied in the past to various machine elements in order to improve their tribological performance. In this study, direct laser interference patterning was used to produce periodic cross-like surface patterns on commercial cylinder roller bearings. The wear behavior of as-patterned bearings was studied by a modified FE8 test rig under boundary lubri...

This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...

The effect of 1-n-butyl-3-methylimidazolium nitrate ionic liquid (IL) on the shear dynamics and tribological properties of contacting ordered alkylsilane self-assembled monolayers (SAM) on SiO(2) surfaces was studied using molecular dynamics simulation. Use of the IL as a lubricant was found to reduce the friction between the contacting monolayers in the studied range of applied loads. At low a...