A retrospective review of 21 patients that underwent bone screw removal from the elbow was studied in relation to the type of metal, duration of implantation, and the location of the screws about the elbow. Screw failure during extraction was the dependent variable. Five of 21 patients experienced hardware failure during extraction. Fourteen patients had titanium alloy implants. In four cases, ...

Complexation reactions of titanium tetraethoxide [Ti(OEt)4] and titanium tetra-n-butoxide [Ti(OBu )4] with 3-pentenoic acid (PA) and allylacetoacetate (AAA), in a 1 : 1M ratio, were studied in ethanol solution at room temperature. C-NMR and FTIR spectra showed that all PA and AAA completely reacted with both titanium alkoxides. Hydridosilane compounds such as triethoxysilane and triethylsilane ...

This study evaluated the feasibility of using three-dimensional printing (3DP) to fabricate porous titanium implants. Titanium powder was blended with a water-soluble binder material. Green, porous, titanium implants fabricated by 3DP were sintered under protective argon atmosphere at 1,200, 1,300, or 1,400°C. Sintered implant prototypes had uniform shrinkage and no obvious shape distortion aft...

The objective of this study is to investigate the effect of cyclic precalcification treatment to impart bioactive properties for titanium implants. Before precalcification, the titanium implants were subjected to blasting using hydroxyapatite (HAp), a resorbable blasting medium (RBM treated), and anodized using an electrolyte containing glycerol, H2O, and NH4F. Precalcification treatment was pe...

Recent accreditation of titanium powder products for commercial aircraft applications marks a milestone in titanium powder metallurgy. Currently, powder metallurgical titanium production primarily relies on vacuum sintering. This work reported on the feasibility of powder sintering in a non-vacuum furnace and the tensile properties of the as-sintered Ti. Specifically, we investigated atmospheri...

Biocompatibility improvements for blood contacting materials are of increasing interest for implanted devices and interventional tools. The current study focuses on inorganic (titanium, titanium nitride, titanium oxide) as well as diamond-like carbon (DLC) coating materials on polymer surfaces (thermoplastic polyurethane), deposited by magnetron sputtering und pulsed laser deposition at room te...

PURPOSE The purpose of this study was to investigate the ion release from titanium casts in solutions of mixed organic acids and to reconsider the possibility of allergic reactions to titanium. METHODS Cast specimens were made from commercially pure titanium. For the immersion solutions, we prepared two types of organic acid solutions, one mixed with organic acids contained in whole stimulate...

Titanium has limitations in its clinical performance in dental and orthopaedic applications. This study describes a coating process using pulsed laser deposition (PLD) technology to produce surfaces of titanium carbide (TiC) on titanium substrates and evaluates the biological response both in vitro and in vivo. X-ray photoelectron spectroscopy (XPS) analysis revealed the presence of 18.6-21.5% ...

Biomedical titanium alloys with Young's moduli close to that of cortical bone, i.e., low Young's modulus titanium alloys, are receiving extensive attentions because of their potential in preventing stress shielding, which usually leads to bone resorption and poor bone remodeling, when implants made of their alloys are used. They are generally β-type titanium alloys composed of non-toxic and all...

Many biological polyelectrolytes are capable of undergoing a fluid-fluid phase separation known as complex coacervation. Coacervates were prepared using hyaluronic acid (HA) and a recombinant fusion protein consisting of mussel adhesive motifs and the RGD peptide (fp-151-RGD). The low interfacial energy of the coacervate was exploited to coat titanium (Ti), a metal widely used in implant materi...