We found that twinned gold nanoparticles (T-AuNPs) are generated at a high probability by CO treatment of TiO2-supported Au(iii) at room temperature. Because of the formation of T-AuNPs, the Au/TiO2 prepared by the CO treatment showed higher catalytic activity for CO oxidation than Au/TiO2 prepared by conventional H2 treatment.

Electrodes based on arrays of TiO2 nanowires were prepared by template sol-gel synthesis with the goal of developing a hydrazine photoelectrochemical sensor. Experimental conditions were chosen so that the gelation reaction occurred inside the nanopores of track-etched polycarbonate membranes, with consequent filling with TiO2 nanowires. Different procedures for the removal of the template were...

The apparent wall slip (AWS) effect, accompanying the flow of colloidal dispersions in confined geometries, can be an important factor for the applications of nanofluids in heat transfer and microfluidics. In this study, a series of dilute TiO2 aqueous dispersions were prepared and tested for the possible presence of the AWS effect by means of a novel viscometric technique. The nanofluids, prep...

Clay-supported TiO2 photocatalysts can potentially improve the performance of air treatment technologies via enhanced adsorption and reactivity of target volatile organic compounds (VOCs). In this study, a benchtop photocatalytic flow reactor was used to evaluate the efficiency of hectorite-TiO2 and kaolinite-TiO2, two novel composite materials synthesized in our laboratory. Toluene, a model hy...

The photocatalytic oxidation of phenol in water in the band reactor with supported TiO2 catalysts was investigated. Modified anatase/Al2O3 catalysts were used as the photocatalysts. The main aim of these studies was to determine catalytic activity of TiO2/Al2O3 and V-TiO2/Al2O3 in the removal of phenol from water. The effectiveness was measured in the configurations: TiO2/UV/O2/H2O2, TiO2/O2/H2...

ZnO/TiO2 nanolaminates were grown on Si (100) and quartz substrates by atomic layer deposition at 200°C using diethylzinc, titanium isopropoxide, and deionized water as precursors. All prepared multilayers are nominally 50 nm thick with a varying number of alternating TiO2 and ZnO layers. Sample thickness and ellipsometric spectra were measured using a spectroscopic ellipsometer, and the parame...