Eu(3+),Tb(3+) doped and undoped NiO films were deposited on TiO2 by a sol-gel spin-coating method as the photoanodes of dye sensitized solar cells (DSSCs). A comparative study with different structures including TiO2, TiO2/NiO and TiO2/NiO:Eu(3+),Tb(3+) as the photoanodes was carried out to illustrate the photovoltaic performance of solar cells. NiO could enhance the performance of DSSCs ascrib...

Thin films of SiO2–TiO2 composite oxides with various SiO2:TiO2 compositions were prepared by the sol-gel method, using tetraethylorthosilicate (TEOS) and titanium tetraisopropoxide (TTIP) as precursors. The composition, crystal structure, and chemical bonding configuration of the as-deposited and annealed SiO2–TiO2 thin films were analyzed using Rutherford backscattering spectrometry (RBS), gl...

To photo-catalytically degrade RhB dye using solar irradiation, CeO2 doped TiO2 nanocomposites were synthesized hydrothermally at 700 °C for 9 hrs. All emission spectra showed a prominent band centered at 442 nm that was attributed to oxygen related defects in the CeO2-TiO2 nanocrystals. Two sharp absorption bands at 1418 cm-1 and 3323 cm-1 were attributed to the deformation and stretching vibr...

The lithium insertion behavior of nanoparticle (3-D) and nanosheet (2D) architectures of TiO2(B) is quite different, as observed by differential capacity plots derived from galvanostatic charging/discharge experiments. DFT+U calculations show unique lithiation mechanisms for the different nanoarchitectures. For TiO2(B) nanoparticles, A2 sites near equatorial TiO6 octahedra are filled first, fol...

Parylene films loaded with TiO2 are reported as photocatalysts in azo dye discoloration processes. The TiO2 loading of the parylene film was 0.32% (w/w) and the amount of TiO2 on the film was about two orders of magnitude below the TiO2 added in suspension to discolore the same solution of Methyl Orange used as a probe. The parylene/TiO2 films showed a similar activity in the presence of O2 or ...

The aim of this chapter is to show the process for the growth of TiO2 nanotube by anodizing and its features as surface. The Ti anodized nanotubes were obtained by anodizing Ti in organic medium. The process of formation of TiO2 nanotubes on Ti surfaces was established ex-situ by Scanning Electron Microscopy (SEM). At first, the growth of the TiO2 on the surface of the Ti plate occurs because o...

A well-designed nanostructure CNT@TiO2-C with fine anatase TiO2 particle (< 8 nm), good electronic conducting network (inner CNT core and outer carbon layer), and mesoporous structure was prepared by a simple and green one-pot hydrothermal reaction. The utilization of glucose in the hydrothermal process not only solves the interfacial incompatibility between CNTs and titanate sol and controls t...

Titanium dioxide (TiO2) nanoparticles are used in many applications. Due to their small size, easy body penetration and toxicological adverse effects have been suspected. Numerous studies have tried to characterize TiO2 translocation after oral, dermal or respiratory exposure. In this study, we focused on TiO2 nanoparticle biodistribution, clearance and toxicological effects after intravenous i...

In this study adsorption of Cd onto TiO2 nanoparticles and natural sediment particles (SP) were studied and the facilitated transports of Cd into carp by TiO2 nanoparticles and SP were assessed by bioaccumulation tests exposing carp (Cyprinus carpio) to Cd contaminated water in the presence of TiO2 and SP respectively. The results show that TiO2 nanoparticles had a significantly stronger adsorp...

Highly ordered anodic TiO2 nanotube arrays fabricated by electrochemical anodization were sensitized with ruthenium dye N-719 to yield dye-sensitized TiO2 nanotube solar cells. Rational surface treatments on photoanode TiO2 nanotubes markedly improved the device performance. With TiCl4 treatment, in conjunction with oxygen plasma exposure under optimized conditions, dye-sensitized TiO2 nanotube...