Rheological characterization of high-solid sludge is a fundamental requirement for optimizing the mixing and transport of high-solid sludge during anaerobic digestion in waste water treatment systems. We investigate the time evolution of physico chemical properties and rheological characteristics of high-solid digested sludge with total solids (TS) 15–20 wt.% during anaerobic digestion. A serie...

the biopolymer-based nanocomplexes are a group of nanocapsules that are used for encapsulation and control delivery of nutraceuticals. they are formed by binding of proteins and polysaccharides. in this study, complex formation between pectin and sodium caseinate was taken place by addition of pectin solutions(0.2, 0.45 and 0.7 % w/v) into the caseinate solutions (0.5, 1 and 1.5 % w/v) and adju...

in the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. this study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. the flexural modulus a...

thermoplastic polyurethane (tpu)/clay nanocomposites were prepared via a melt-compounding method using ester type tpu and two different modified organoclays (cloisite 30b and cloisite 15a) in different contents. the effects of the chemical structure and content of the nanoclays on the thermal degradation and mechanical properties of tpu were also investigated. the effect of structural modificat...

The impedance at frequencies of 1-1000 kHz and dynamic bending storage modulus measured by the vibrating reed method were compared for potato tuber tissue, which had been processed by various methods. Raw potato tuber tissue strips were either heated for 30 min up to 100 degrees C or frozen-thawed. Some samples were osmotically dehydrated in a mannitol solution up to a concentration of 0.7 mol/...

In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

Mortar with high workability even without a water-reducing agent and with high tensile and compressive strengths (3.1 and 78 MPa, respectively) was obtained by using as an admixture silica fume that had been surface treated with a silane coupling agent. The treatment enhanced the wettability of silica fume by water, thereby increasing the workability of the mortar mix. It also enhanced the bond...