Background: The presence of a wedge filter in the beam trajectory can modify the beam quality and cause some changes in the dosimetry parameters which are usually difficult to be measured directly and accurately. Material and Methods: In this study the MCNP-4C Monte Carlo code was used to simulate the 9 MV photon beam generated by a linear accelerator. Upon getting a good agreement bet...

In this paper, two sets of comparative fatigue tests on weathering steel-concrete composite girders were carried out in the context girder bridges. The load-deflection relationship under loading different environments was investigated contrastively. experimental results show that coupled effect corrosive environment and load, steel still shows obvious corrosion; simple load has no significant s...

This paper presents research on a new type of fabricated steel–wood composite floor material in the style slab-embedded beam flange, using test methods and finite element numerical analysis to study flexural load-bearing performance slabs. Through experimental phenomena, failure process mechanism are analyzed, deformation ultimate bearing capacity assessed. model, influence connection mode beam...

Due to lack of the proper and well behavior of steel moment-resisting connections subjected to the great and major earthquakes, excessive researches have been conducted to mitigate the damages on the primary elements and connections. Therefore, elimination of residual drift and increasing the plastic rotation capacity for the connectors in the panel zone are required. The main purpose of this s...

This Note describes calculations of the shielding necessary to reduce the dose rate to less than 0.05 mrem/h when synchrotron radiations emitted by the LCLS electrons beam hit a worst type scattering target located in the hard X-ray line. The calculations were performed using the FLUKA Monte-Carlo code and as well as the STAC8 analytical code. The photon spectrum used as a source term correspon...

The floor beams of steel buildings, cold-formed steel floor joists in particular, often require large web openings, which may affect their shear capacities. A cost effective way to mitigate the detrimental effects of such openings is to weld/fasten reinforcements. A difficulty associated with an experimental investigation to establish suitable reinforcement schemes for openings in shear zone is...

PURPOSE Vertical root fracture (VRF) is a common complication in endodontically treated teeth. Considering the poor prognosis of VRF, a reliable and valid detection method is necessary. Cone beam computed tomography (CBCT) has been reported to be a reliable tool for the detection of VRF; however, the presence of metallic intracanal posts can decrease the diagnostic values of CBCT systems. This ...

the present study sets out to integrate the performance-based seismic design approach with the connection topology optimization method. performance-based connection topology optimization concept aims to simultaneously optimize the size of members and the type of connections with respect to the framework of performance-based seismic design. this new optimization concept is carried out for unbrac...