displacement coefficient method (dcm) stipulated in the asce 41-06 standard is becoming the preferred method for seismic rehabilitation of buildings in many high-seismic-hazard countries. applications of the method for non-building constructions such as bridges are beyond the scope of this standard. thus its application to this kind of structure should be approached with care. target displaceme...

the levy-type analytical solution is employed for the problem of bending of cross-ply and antisymmetric angle-ply piezoelectric hybrid laminated plates with at least two simply supported opposite edges. the governing equations of equilibrium are derived in the framework of the first-order shear deformation plate theory. the equations are classified according to the crystallography type of piezo...

Motion strategy analysis at the pre-bending stage is a fundamental component of underactuated finger grasp research. This study presents motion and corresponding cable driving forces 3-DOF comprising truss units. The structure four strategies are illustrated. equivalent joint-driven quasi-static models established in case where one or two drive finger. Quasi-static model established, typical co...

Using the static analysis of ANSYS 19, longitudinal, radial, and tangential beam specimens spruce, Scots pine, beech were subjected to stress strain under symmetrical four-point bending asymmetrical bending. The effects wood grain on surface specimen its properties transverse longitudinal at center studied experimentally. results show that method is suitable for testing elastic modulus, Poisson...

To better understand the mechanical characteristics of biplane locked plating in small bone fixation, the present study compared the stability under cyclic cantilever loading of a 2-plate locked biplane (BPP) construct without interfragmentary compression with that of a single-plate locked construct with an additional interfragmentary screw (SPS) using surrogate bone models simulating Lapidus a...

INTRODUCTION This article aims to evaluate how different superelastic nickel-titanium (NiTi) alloys determine the static mechanical performance of endodontic files during bending and torsion. METHODS Two NiTi rotary instruments with similar geometries and equal cross sections, ProFile GT (GT) and a GT Series X (GTX), were selected. The latter file is made from M-Wire, a NiTi alloy that, accor...

Simulating the mechanical behavior of a cloth is a very challenging and important problem in computer animation. The models of bending in most existing cloth simulation approaches are taking the assumption that the cloth is little deformed from a plate shape. Therefore, based on the thin-plate theory, these bending models do not consider the condition that the current shape of the cloth under l...

It is well known that bimetallic microcantilevers can exhibit static deflection as a result of thermal effects, including exothermic adsorption of chemicals on their surfaces. It is shown here that the resonance frequency of a cantilever can change due to a combination of mass loading and change of spring constant resulting from adsorption of chemicals on the surface. Cantilevers also undergo s...

A finite model updating method that combines dynamic-static long-gauge strain responses is proposed for highway bridge static loading tests. For this method, the objective function consisting of static long-gauge stains and the first order modal macro-strain parameter (frequency) is established, wherein the local bending stiffness, density and boundary conditions of the structures are selected ...

This study is to evaluate the behavior of integral and segmental specimens through static and cyclic tests. Integral specimens were made with the same size to be compared with segmental specimens that were made by connected precast members. To evaluate its bending performance and serviceability, 1 integral and 3 segmental specimens were tested under static load. And 1 integral and 2 segmental s...