The calculation of heat consumption is based on the First Law and it gives quantitative information about the energy used in drying. However, it does not pay any attention to the quality of the energy used in drying. To take into account the quality of the energy, attention must be paid to the Second Law, too. Especially in those cases where the energy used in drying may be converted to mechani...

The drying behavior of green peas is investigated in a pilot scaled Fluidized Bed Dryer (FBD) with inert particles assisted by an Infra Red (IR) heat source. The variation of shrinkage and moisture diffusivity with temperature and moisture content were investigated. The experimental drying curves were adjusted to the diffusion model of Fick’s law for spherical particles. The result was that...

The effect of thermal and solutal buoyancy induced by a discrete source of heat and mass transfer in a square duct under the influence of magnetic field, especially at the turbulent regime for the first time is reported. Al2O3/water nanofluid is used with constant heat flux from three discrete heat sources. In the present study, the effects of Reynolds number (100 to 3000), particle volume frac...

In this article, we study inverse source problems for time-fractional diffusion equations from a posteriori boundary measurement. Using the memory effect of these class equations, solve several space- or time-dependent terms. We prove also unique determination general space–time-dependent separated variables terms such Our approach is based on singularities Laplace transform in time traces solu...

transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. high temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. using thermal shields on the transfer table is cons...

Stationary and moving plane heat source analysis have application in several manufacturing processes such as metal cutting, spot welding, laser cutting/surface treatment (using CO2 or Argon lasers) as well as tribological applications including ball bearing and gear design [1-5]. Temperature profile and the rate of cooling at and near the surface can affect the metallurgical microstructures, th...

in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...

The Savannah River Site (SRS) made significant contributions to NASA space missions via the heat source programs that provide electrical power to satellites traveling outside of earth orbit. Electrical power was supplied by converting heat from the radioactive decay of plutonium-238. The Site produced the Pu-238 in its reactors, separated the plutonium in the canyon facilities, and, for the Mul...

The present work solves two-dimensional Advection-Dispersion Equation (ADE) in a semi-infinite domain. A variable source concentration is regarded as the monotonic decreasing function at the source boundary (x=0). Depth-dependent variables are considered to incorporate real life situations in this modeling study, with zero flux condition assumed to occur at the exit boundary of the domain, i.e....