The sintering behaviour of several green compacts made with olivine or olivine/alumina powder blends has been examined. To this goal, powders were attrition milled, uniaxially pressed into specimens and air sintered at temperatures ranging from 1100 to 1300 °C. The resulting samples were characterized by water absorption, shrinkage, phase composition and density. Compositions containing 5%, 10%...

The electric field has a large effect on the stoichiometry and grain growth of UO2+x during Spark Plasma Sintering. UO2+x is gradually reduced to UO2.00 as a function of sintering temperature and time. A gradient in the oxidation state within the pellets is observed in intermediate conditions. The shape of the gradient depends unequivocally on the direction of the electrical field. The positive...

The nature of microwave sintering cannot be explained in the past and has been generally called microwave effect. Here we show that the E-field intensification is the reason of microwave fast sintering of solid state inorganic compounds. The intensification degree varied with dielectric constant of compound, distance between two particles, angle between the direction of E-field and the normal t...

Ti-Al-Si alloys are prospective material for high-temperature applications. Due to low density, good mechanical properties, and oxidation resistance, these intermetallic alloys can be used in the aerospace and automobile industries. Ti-Al-Si alloys were prepared by powder metallurgy using reactive sintering, milling, and spark plasma sintering. One of the novel SPS techniques is high-pressure s...

Microwave sintering (MWS) of commercially available 15-nm-size nanocrystalline TiN powder was studied. Densification kinetics and grain growth mechanisms of nano-TiN were evaluated using non-isothermal heating up to 1500 °C with variable heating rates. A true nanocrystalline ceramic with ~80-nm-size grains and 94.5 % theoretical density was obtained via MWS consolidation at 1400 °C. At higher t...

In this study, thermal radiation was employed for sintering silicon carbide foams that achieved a gradient porous structure. The simultaneous use of graphite and carbon fiber reinforced carbon composite (Cf/C) radiators resulted in an axial temperature gradient of ~600°C along the cylindrical sample, as confirmed by both numerical simulation and experimental measurement. By sintering the cylind...

As the additive manufacturing (AM) industry continues to boom, the material palette continues to grow. However, the materials applicable to selective laser sintering (SLS) remains limited. Typically, the scanning laser beam heats each location for milliseconds at a time with a very high heating flux followed by quick cooling. This can create large temperature gradients and high local temperatur...

Characterization of the pore structure of compacted and sintered parts made from a nickel-base powder was accomplished using the mercury porosimetry method. The theoretical density values for the sintered specimens varied from 56.3 to 96.7% which corresponds to a porosity of 43.7 to 3.3%. A maximum interconnecting median pore diameter of 21 mum resulted from a -80/+200 mesh powder compacted at ...

This paper investigates thermal modelling of the selective laser sintering process for amorphcus polycarbonate powders. The aim is to develop a simulation for process accuracy and control which are key areas of developement for the new layer manufacturing rapid prototyping technologies. A state-of-the-art adaptive mesh 2 0 finite difference code is used simultaneously to consider heating and si...