Silicon is an attractive alloy-type anode material because of its highest known capacity (4200 mAh/g). However, lithium insertion into and extraction from silicon are accompanied by a huge volume change, up to 300%, which induces a strong strain on silicon and causes pulverization and rapid capacity fading due to the loss of the electrical contact between part of silicon and current collector. ...

Silicon is an attractive alloy-type anode material for lithium ion batteries because of its highest known capacity (4200 mAh/g). However silicon's large volume change upon lithium insertion and extraction, which causes pulverization and capacity fading, has limited its applications. Designing nanoscale hierarchical structures is a novel approach to address the issues associated with the large v...

Stent is a metal mesh tube for opening the obstructed vessels of the body. Ni-Ti alloy is a suitable metal for fabrication of stent due to its potential for applying the appropriate stress and strain to the vessel walls. In this study, super-elastic Nitinol wire was used to build stent samples usable to open femoral vessel. Ageing was performed at 500°C for different periods of time to determin...

The negative impact of the automotive industry on climate change can be tackled by changing from fossil driven vehicles towards battery electric vehicles with no tailpipe emissions. However their adoption mainly depends on the willingness to pay for the extra cost of the traction battery. The goal of this paper is to predict the cost of a battery pack in 2030 when considering two aspects: first...

Titanium-silicon alloys have been electrochemically extracted from the multi-component titanium compounds in molten calcium chloride electrolyte. Sintered pressed pellets of titanium-bearing compounds served as the cathode, and the electrochemical experiments were systematically carried out at 900 °C, 3.1 V and 1000 °C, 3.8 V using a graphite-based anode and an improved inert-oxygen-ion-conduct...

Cu-Mo and Cu-Ti contact structures were fabricated on multi-crystalline silicon substrates to provide a low resistance ohmic contact. Deposition steps are done in an excellent vacuum chamber by means of electron beam evaporation and samples are then annealed for the realization of an efficient alloy layer. The effects of process parameters such as film thickness, annealing duration and temp...

In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...

The structural and electronic properties of nickeland phosphorus-doped boron–carbon (B5C) alloy thin films grown by plasma-enhanced chemical vapor deposition have been examined. The Ni-doped boron–carbon alloys were grown using closo-1,2-dicarbadodecaborane (C2B10H12) as the boron–carbon source compound and nickelocene (Ni(C5H5)2) as the nickel source. The phosphorus-doped alloys were grown usi...

A hybrid process of slag and solvent refining was used to remove boron phosphorus from silicon. Quaternary CaO-Al2O3-SiO2-Na2O employed (B) (P) Si-20 wt% Fe alloy at 1300 °C. slag-to-metal ratio one different reaction times. The mass transfer coefficient B P in the phases calculated determine rate-limiting step. coefficients were 6.6 × 10−7 ms−1 2.8 ms−1, respectively. determined be 7.5 10−8 3....

Concerning a Fe-Mn-Si shape memory alloy, it was thought of magnetic measurements to follow the evolutions with temperature of an as quenched steel before and after a 2.5% prestrain. INTRODUCTION The shape memory effect, related to the reverse E -. y transformation of a single crystal of FeMn-Si, was fist shown by Sato (1). Many works are devoted to polycrystalline Fe-Mn-Si steels (2,3). The E ...