To investigate the variation in the characteristics of rock microstructure after cyclic dynamic disturbances, a split Hopkinson pressure bar (SHPB) was used to carry out cyclic dynamic impact tests on granite, and the P-wave velocity was used as the characteristic parameter representing the microstructural change. Using the nuclear magnetic resonance (NMR) technique, the porosity and the T2 dis...

The presence of porosity in a material was first shown by Robert Hooke (1635–1703) who, in his investigations of the natural world using the newly available microscope, observed that the structure of cork was based on regular hollow units which he termed “cells”, because they reminded him of the cells of a monastery. Indeed, the fact that most natural structures are porous is a clear indication...

At the Centre for X-ray Tomography of the Ghent University (Belgium) (www.ugct.ugent.be) besides hardware development for high-resolution X-ray CT scanners, a lot of progress is being made in the field of 3D analysis of the scanned samples. Morpho+ is a flexible 3D analysis software which provides the necessary petrophysical parameters of the scanned samples in 3D. Although Morpho+ was original...

Homogenisation of consolidation and compressible fluid flow in dual-porosity media has highlighted the existence of three characteristic macroscopic behaviours. These three behaviours are, namely, a dual-porosity description which includes memory effects, a single-porosity description with which the micro-porosity is simply ignored, and an intermediate behaviour which we refer as behaviour with...

Calcareous stones such as Lecce stones have a high porosity which results in a readily uptake of rainwater. Due to the atmospheric pollutants dissolved in the water these stones, used in a lot of historical buildings, are constantly under attack which leads to a decay of the stone. Different kind of organic hydrophobic products such as Paraloid B72 and fluorinated rubber are often applied as pr...

Transformation of Al(NO3)3∙9H2O (upon heating in the range of 20-1200 °C) into blends of amorphous and crystalline boehmite (210-525 °C), amorphous alumina and crystalline γ-Al2O3 (850 °C), and crystalline α-Al2O3 (1100 °C) was analyzed using X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), infrared (IR) spectroscopy, thermogravimetry, and low-temperature nitro...

Some key parameters of supports such as porosity, pore shape and size are of great importance for fabrication and performance of zeolite membranes. In this study, we fabricated millimetre-thick, self-standing electrospun ceramic nanofibre mats and employed them as a novel support for zeolite membranes. The nanofibre mats were prepared by electrospinning a halloysite nanotubes/polyvinyl pyrrolid...

The aim of the research that is presented in this paper was to evaluate the physical and mechanical properties of heat-insulating mortars with expanded cork aggregates and different binders. In this work, the measurements of surface roughness and adhesion strength, supported by determination of basic mechanical and physical parameters, such as density, bulk density, open porosity, total porosit...

Field measurements of conductivity, porosity, etc. have shown their are high heterogeneity, the bounds of such heterogeneity increasing as the scale of observations changes. This has led to the development of fractal models, renormgroup methods, and methods of subgrid modeling. The subgrid modeling approach, associated with problems of the subsurface hydrodynamics, is presented. We consider a s...

[1] In this study, we used porosity to assess the compaction state of the Nankai accretionary wedge sediments and any implications for stress and pore pressure. However, hydrous minerals affect porosity measurements, and accounting for them is essential toward defining the interstitial porosity truly representative of the compaction state. The water content of sediments was measured in core sam...