Reservoir characterization is a difficult problem due to nonlinear and heterogeneous physical properties of the subsurface. In this context, we present a case study to compare Artificial Neural Network (ANN) with Adaptive Neuro Fuzzy Inference System (ANFIS) for predicting two reservoir characteristics: porosity and sand fraction from well log data. The predictor variables are gamma ray content...

Monolithic aerogels of high molecular weight polyethylene (Mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. These low density and highly porous aerogels present an apparent porosity up to 90%. The aerogel morphology observed by scanning electron microscopy (SEM) is characterized by spherulitic stru...

Filtration of an isotonic suspension of baker's yeast through a 0.45-μm membrane was studied at two different pressures, 40 and 80 kPa, for yeast concentrations ranging from 0.14 to 51 kg/m(3) (dry weight). For a yeast volume fraction above 0.06 (~21.8 kg/m(3) ), the porosity of the yeast cake is less dependent on the suspension concentration. For highly diluted suspensions, the specific cake r...

In analytical chemistry, silica gel plays a pre-dominant role in separation science. It is the most important stationary phase in chromatography and electrophoresis. Separation efficiency is directly dependent on the quality and physical properties of the chromatographic bed. Therefore, methods for the physicochemical characterisation of silica stationary phases have been developed over the pas...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...

Continuous-fiber-reinforced ceramic matrix composites (CMC) have been proposed as candidates for high-temperature applications. Their architecture and network of porosity have a strong effect on the mechanical behavior. X-ray tomography is a non-destructive technique that allows studying the volume mesostructure of these porous materials. The volume porosity, the open porosity fraction, the con...

The radius of investigation (ROI) is an essential parameter in many reservoir engineering applications. Inconsistencies and ambiguities still exist between different ROI evaluation methods, especially for the dual-porosity (DP) system representing naturally fractured reservoirs. This paper revisited impact inter-porosity flow DP presented equations early late periods based on Laplace space solu...

Growth experiments have been carried out to characterize the occurrence and development of porosity in Bridgman and flux grown Al-Pd-Mn icosahedral quasicrystals. The porosity level has been observed to fluctuate between values of 0.0 and 3.75 percent along the length of Bridgman single crystals implying that the development of porosity is affected by the local growth conditions. Experiments we...

in order to provide the data needed for the design of saffron processing equipment, physical properties of its flower were investigated. these properties included dimensions, mass, true and bulk densities, porosity, static and dynamic coefficients of friction, and terminal velocity as a function of moisture content. the average range of these properties for the three different parts of saff...