Sarcomas In mice were induced by i.m. and s.c. administra tion of 63Niand 36S-labeled nickel subsuifide (Ni3S2), and the fate of the Ni3S2 was studied in tumors and normal tissues during carcinogenesis. Whole-body autoradiography showed a gradual loss of solubilized 63Ni and 35S radioactivity from the site of injection. There was also a loss of nonsolubilized dust particles which appeared to be...

Chronopotent iometry of chromate in the presence of NiC12 in molten LiCIKCI eutectic reveals a diffusion controlled, three electron reduct ion step. In the presence of excess NiC12, chromate is reduced at --0.35V vs. P t ( I I ) / P t reference electrode and the electroactive species responsible for the chronopotentiometric wave is estimated to have a diffusion coefficient of 1.06 9 10 -5 cm 2 ...

Nickel and aluminum powders were mechanically alloyed with 10 or 30 vol.% refractory metal powders (molybdenum or tungsten) for times up to 50 h. Intermetallic synthesis takes place after lo-20 h alloying, with concomitant dispersion of the inert refractory metal phase, resulting in an NiAl matrix containing fine refractory dispersoids. The reactive synthesis step is direct, without intermediat...

Ni/NiO nanopowders have been prepared by using thermal decomposition of aqua solutions of nickel acetate ammine complexes in air at the annealing temperature range of 300°C to 500°C, time of decomposition from 30 to 180 min, and ammonia content in initial complex 3.6 to 9.55 mol/mol Ni(2+). Chemical composition of obtained powders has been characterized by chemical and thermal analysis. Phase a...

In this paper, polymer grafted nickel-doped iron oxide nanoparticles are fabricated via an easy, one-step and fast electrochemical procedure. In the deposition experiments, iron(II) chloride hexahydrate, iron(III) nitrate nonahydrate, nickel chloride hexahydrate, and dextran were used as the bath composition. Dextran grafted nickel-doped iron oxides (DEX/Ni-SPIOs) were synthesized with applying...

Combustion synthesis is a special thermophysico-chemical process applied for production of intermetallic compounds. In the present work, a reaction–diffusion numerical model was developed to analyze the combustion synthesis of aluminide intermetallics by self-propagating high-temperature synthesis process. In order to verify the reliability of the numerical model, an experimental setup was desi...

Layered metal hydroxides exhibit non-uniform broadening of lines in their X-ray powder diffraction (XRPD) patterns, which cannot always be explained on the basis of crystallite size effects. In the case of hexagonal solids such as nickel hydroxide, DIFFaX simulations of the XRPD patterns show that: (1) stacking faults and turbostratic disorder at low (<30%) incidence selectively broaden the h0l...

The Fe-Ni-Pb-B alloy nanoparticles was prepared by a solid-solid chemical reaction of ferric trichloride, nickel chloride, lead acetate, and potassium borohydride powders at room temperature. The research results of the ICP and thermal analysis indicate that the resultants are composed of iron, nickel, lead, boron, and PVP, and the component of the alloy is connected with the mole ratio of pota...

Abstract Lithium manganese oxide thin films have been deposited on nickel (Ni) and platinum (Pt) coated stainless steel substrates at room temperature using powder target by Radio Frequency (rf) reactive magnetron sputtering. The samples are exposed to heat treatment 500 °C form crystalline phase. Nickel film coatings carried out direct current (DC) X-ray diffraction (XRD), photoelectron spectr...

Nickel alloying of carbon steel is used to enhance strength and toughness. the weld metal via solid wire presents several difficulties as highlighted previously, such work hardening in manufacturing feeding through SAW mechanism, expensive time consuming multiple formulations. The application nickel aluminium powders unconstrained format, meaning not fluxed cored or wire, simplify alloying. Al ...