Membrane Condenser (MC) is a novel membrane contactor operation recently investigated for the valorization of industrial waste gaseous streams. In particular, until now, it was applied for water recovery from flue gas, cooling tower plumes, etc. More recently, its effectiveness and flexibility in contaminants (such as, NH3 , HF, SO2 ) removal and control from waste gaseous streams was also prov...

This paper presents the results of an investigation on the effects of concentration of cations on activated sludge properties and membrane fouling in submerge membrane bioreactors. The working volume of the experimental setup was two liters. The cellulose acetate membrane was immersed in the bioreactor. The flocculability, settling properties and fouling propensity of activated sludge was measu...

3D modeling of Pd/α-Al2O3 hollow fiber membrane by using computational fluid dynamic for hydrogen separation from H2/N2 mixture was considered in steady and unsteady states by using the concept of characteristic time. Characteristic time concept could help us to design and calculate surface to volume ratio and membrane thickness, and adjust the feed conditions. The contribution of resistance be...

The present study was carried out to estimate genetic variability parameters for some traits such as pods per plant, cell membrane stability, one thousand kernel weight, flowering period, grain filling period, chlorophyll content, relative water content, leaf excised water content, seed per pod and pod length, in 16 winter rapeseed genotypes. Statistical analysis showed significant differences ...

the preparation of polymer membrane selective to iron(ii) ion and its application to ion-selectiveelectrode is reported here. pvc membrane contains iron–selective n-phenylaza-15-crown-5 asionophore. the membrane electrode is highly selective to iron(ii) ion and exhibit good linearresponse over a wide concentration range of 1.0 × 10-2 to 1.0 × 10-6 m with nernstian slope of29.2 ± 0.6 mv per deca...

the effects of operating parameters such as feed temperature and permeate-side pressure on the performance of a commercial pva membrane in the dehydration of toluene by a pervaporation (pv) membrane system is studied in the present work. the results obtained indicate that increasing temperature in the range of 40 to 70 °c and reducing permeate pressure in the range of 1 to 10 mmhg increase memb...

In this study, the ultrafiltration membrane for humic substance removal was prepared by blending polysulfone with a high concentration of PEG400 as additives. The influences of the additive to the fouling resistance capability and humic substances rejection of the polysulfone membrane were investigated. The addition of 35%wt of PEG400 concentration improved the pure water flux up to 200, but re...

comnode classification within membrane residue curves (m-rcms) currently hinges on lyapunov’s theorem and therefore the computation of mathematically complex eigenvalues. this paper presents an alternative criterion for the classification of nodes within m-rcms based on the total membrane flux at node compositions. this paper demonstrates that for a system exhibiting simple permeation behaviour...

a pebax-nano zeolite x mixed matrix membrane was fabricated and operationally characterized using single gas (co2) permeation. x-ray diffraction (xrd) analysis was used to study the arrangement of polymer chains of mixed matrix membrane. the membranes were characterized by scanning electron microscopy (sem) to study cross-sectional morphology. the single gas permeability were carried out for ne...