Bubble columns (with and without suspended solids) have been used widely as chemical reactors, bioreactors and equipment for waste water treatment. The key design parameters in bubble columns are: • gas holdup; • gas-liquid interfacial area; • volumetric liquid-phase mass transfer coefficient; • gas and liquid axial dispersion coefficients; Despite the large amount of studies devoted to hydrody...

Gas absorption accompanied by an instantaneous irreversible chemical reaction in bubble columns has been analyzed theoretically. A mass transfer model based on the Dankwerts surface-renewal model as well as the penetration theory for surface stretch proposed by Angelo et al. was developed, in which the effects of bulk motion and turbulence on mass transfer were taken into account. The analytica...

Rigorous analysis of the determinants of volumetric mass transfer coefficient (kLa) and its accurate forecasting are of vital importance for effectively designing and operating stirred reactors. Majority of the available literature is limited to systems with low solids concentration, while there has always been a need to investigate the gas-liquid hydrodynamics in tanks handling ...

The gas permeability of plastic films is important in packaging, containment, and agricultural fumigation. Recently, an approach for estimating the mass transfer coefficient of vapors across a film was presented by Papiernik et al. (2001). The mass transfer coefficient is an intrinsic property of a film-chemical combination, independent of the concentration gradient maintained across the film. ...

Joule-Thomson cooling systems are used in refrigeration and liquefaction processes. There are extensive studies on Joule-Thomson cryogenic systems, but most of them coverage steady state conditions or lack from experimental data. In the present work, transient thermal behavior of Joule-Thomson cooling system including counter current helically coiled tube in tube heat exchanger, expansion valve...

The key element in developing an analytical or mathematical procedure is to determine the main factors that possess potential importance in oxygen transfer process. In this paper, the factors that affect the oxygen mass transfer coefficient (KLa) in activated sludge units are determined. A dimensional analysis procedure is adopted to develop a mathematical model, which can be used for calculati...

The effect of fish gelatin addition on mass transfer, nutrient loss, texture and nanostructure of fish balls was investigated. Mass transfer models were built and the root-mean-square-errors were 0.1432, 0.3178 and 0.1000 for exponential, power-law and linear models, respectively. After gelatin addition, the mass transfer coefficient/model parameter and moisture content increased, and the hardn...

Wind-driven surficial oxygen transfer into stationary water bodies has become increasingly important because the fate of many pollutants in these water bodies is strongly influenced by oxygen mass transfer. There are many existing correlations that can be used for predicting wind-driven surficial oxygen transfer; however, the actual prediction has been difficult because there are large variatio...

the aim of this study was to investigate the rate of water vapor permeability (wvp) and moisture sorption of starch-montmorillonite (mmt) nanocomposite films. the nanocomposite films were prepared using the casting method andglycerol was used as a plasticizer. the effect of glycerol concentration on wvp of the films was determined at 25°c with a relative humidity of 0-99% (inside and outside of...