نتایج جستجو برای: martensitic stainless steel aisi 420
تعداد نتایج: 94403 فیلتر نتایج به سال:
In this study, three different vegetable-based cutting fluids developed from raw and refined sunflower oil and two commercial types (vegetable and mineral based cutting oils), were carried out to determine for thrust force and surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool. The uses of vegetable cutting oils was investigated in reducing thrust force and ...
Transient liquid phase bonding of UNS S32750 super duplex stainless steel to AISI 304 austenitic stainless steel using BNi-2 interlayer was carried out at 1050 oC for 45 min. Microstructure analyses of the joint were carried out using optical microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Microhardness indentation and shear strength test were performed to as...
Original scientific paper Stress measurement by using ultrasonic waves is based on acoustoelasticity law, i. e. the relation between stress and wave velocity in engineering materials. Longitudinal critically refracted (LCR) wave is a popular ultrasonic wave in the ultrasonic stress measurement application. The LCR wave is a bulk longitudinal wave that travels within an effective depth underneat...
Since martensitic precipitation hardened 17-4pH stainless steel has been widely used in corrosive environments, evaluation of its corrosion fatigue behavior is important. In this research, after microstructural studies, mechanical, corrosion, fatigue and corrosion fatigue tests were performed on 17-4pH specimens. Fatigue and corrosion fatigue tests were carried out at the stress ratio of -1 an...
Modulus of elasticity of flapper valve material is an important parameter for compressor design since it can affect efficiency and life time of the compressor. Modulus of elasticity is usually considered as a material constant. Actually, it can vary with material orientations and conditions and even environments such as temperature will also affect this value. Therefore, the parameters that can...
Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...
Nitride coatings with excellent hardness and wear resistance have been deposited by physical vapor deposition (PVD) in recent years. For most applications, the load bearing and adhesion of coatings are very important and can determine the life and performance of the final components. In this study, CrN/CrAlN nanostructured coatings with different thicknesses and numberes of layers were deposite...
Austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. In the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed AISI 304L stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. For this purpose, samples were subjec...
Austenitic Type 304L stainless steel (SS) and martensitic Alloy EP-823 have been identified as candidate structural materials to contain spallation arget for transmutation of nuclear waste. Welded specimens consisting of either or both materials have been evaluated by transmission electron icroscopy (TEM) to determine the dislocation density near the heat-affected-zone (HAZ) and the base materi...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید