Nano size nickel copper ferrite powders (NiCuFe2O4) have been prepared by a prepared by Co precipitation method. The resulting powders were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM).The result showed nanosize nickel copper ferrite(35.65nm). The powders showed extensive XRD line broadening and sizes of crystals observed from the XRD line broadening was35.65 nm,...

Nanostructured zinc-copper mixed ferrite was synthesized using sol-gel method. XRD patterns of different compositions of zinc-copper ferrite, Zn(1-x)Cu(x)Fe2O4 (x = 0.0, 0.25, 0.50, 0.75), revealed single phase inverse spinel ferrite in all the samples synthesized. With increasing copper concentration, the crystallite size was found to be increased from 28 nm to 47 nm. The surface morphology of...

Strontium ferrite nanoparticles were prepared by a coprecipitation method, and reduced graphene oxide/strontium ferrite/polyaniline (R-GO/SF/PANI) ternary nanocomposites were prepared by in situ polymerization method. The morphology, structure, and magnetic properties of the ternary nanocomposites were investigated by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-I...

Ferrites have always been a subject of great interest from point of view of magnetic application, since the fist compass to present date. In contrast, the scientific interest for iron based magnetic oxides decreased after Ørsted discovery as they where replaces by coil as magnetizing sources. Néel discovery of ferrimagnetism boosted again interest and leads to strong developments during two dec...

Recent work has shown that bainitic ferrite plates produced by transformation at low temperatures can be as thin as 20 nm with a hardness in excess of 650 HV30, tensile strengthy2.3 GPa and toughnessy30 MPa m. Because these properties rely on the fine scale of the microstructure, a study has been carried out in relation to the tempering resistance of steel over the temperature range 350 – 750uC...

The purpose of this study was to discuss the microstructure, recrystallization, and mechanical property evolutions in the heat-affected zones and fusion zones during dissimilar stainless steels welding. The morphology, quantity and chemical composition of the -ferrite were analyzed by using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and ele...

The frequency dependences of complex initial permeability for triplecomponent composite materials based on two different types of ferrite filler (MnZn and NiZn ferrite) and a nonmagnetic polymeric matrix (PVC) were studied in the frequency range of 10 kHz–1 GHz. The frequency dispersion of permeability is discussed by means of a dynamic model based on the superposition of the two types of magne...

The evolution of microstructure and texture during wire drawing of pearlitic steel was studied using scanning electron microscopy and X-ray diffraction. Wire drawing induces elongation of ferrite grains with the development of <110> fibre texture. The cementite lamellae also have a tendency to reorient themselves along the wire axis with increasing strain. Viscoplastic self-consistent simulatio...

There are precise observations which indicate the reluctance of excess carbon within bainite or martensite to partition into adjacent austenite in spite of prolonged heat treatment at temperatures where carbon is mobile. To explain this, we report the first calculations of the solubility of carbon in tetragonal ferrite that is in equilibrium with austenite. It is found that the solubility is dr...

The press formability of a dual-phase stainless steel sheet consisting of ferrite and austenite phases was estimated from a viewpoint of texture using plastic strain ratios (r-values). From the comparison of the mechanically obtained r-values by tensile test and the r-values calculated from the crystal orientation distribution functions (ODFs) of each phase, we found the ferrite phase contribut...