A systematic approach to computer-aidedmaterials design has formulated a new class of ultratough, weldable secondary hardened plate steels combining new levels of strength and toughness while meeting processability requirements. A theoretical design concept integrated the mechanism of precipitated nickel-stabilized dispersed austenite for transformation toughening in an alloy strengthened by co...

Cementitious composite is one of the most widely used construction materials in the world because its abundant resources, strong adaptability and mature production process [1]. Despite cementitious matrices present good compression strength, they are brittle and usually break when suffer some strain caused by tensile effort. Aiming to overpass this problem some fibers can be used as reinforceme...

The corrosion of steel reinforcement in an aging highway infrastructure is a major problem currently facing the transportation engineering community, in particular bridge engineers. In the United States, maintenance and replacement costs are measured in billions of dollars. Further, the use of deicing salts has resulted in steady deterioration of bridge decks due to corrosion. These concerns ha...

Initiation of corrosion on reinforcing bars occurs when a critical chloride concentration is achieved. A universal value for the chloride concentration that causes depassivation has not been agreed upon for carbon steels due to a variety of experimental factors. The chloride threshold depends on the rebar material, rebar surface condition, testing environment, method of detection, definition of...

V. Aleksić, Institute for Testing Materials-IMS Institute , Belgrade, Serbia, M. Dojčinović, Lj. Milović, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, I. Samardžić, University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia. This paper presents the research into behaviour of HSLA steel affected by cavitation. The parent material (PM) and s...

This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip...

Stress–strain behavior of a low carbon alloy multiphase steel with ferrite, tempered bainite, and retained austenite was studied at different cryogenic temperatures. Results indicated that both strength ductility were enhanced decreasing tensile testing temperature. The enhancement attributed to the decreased mechanical stability temperature, resulting in sufficient transformation induced plast...

Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...

In this paper, the semiconducting behavior of carbon steel in acid, base and salt solutions was studied by utilizing potential-capacitance and Mott-Schottky analysis. It was pointed out that the capacitance variation of space charge layer of carbon steel in different solution was different. The carbon steel showed p-type semiconducting behavior in 5% sulfuric acid and 5% sodium sulfate solution...

Effect of the addition of various inoculants on the morphology and mechanical properties of low C-Mn and low alloy steel samples is studied by thermal and mechanical processing of the samples after solidification. According to the results obtained from metallographic studies with the electron microscope and microanalysis with x-rays, the distribution of inoculating agents in the steel matrix is...