abstract land surface hydrological models has importance in the determination of soil moisture and temperature, the rate of evapotranspiration, stream flow by emphasis on the land surface physical and dynamic process descriptions. in this research, vic land surface hydrological model has been used for the land surface temperature and stream flow determination. the vic runoff simulation in each ...

PURPOSE OF THE STUDY The aim of this study was to simulate different types of cervical vertebra loading and to find out whether mechanical stress would concentrate in regions known in clinical practice as predilection sites for osteophyte formation. The objective was to develop a theoretical model that would elucidate clinical observations concerning the predilection site of bone remodelling in...

In this study, the membrane biofilm reactor (MBfR) is proposed to achieve simultaneous removal of ammonium, dissolved methane, and sulfide from main-stream and side-stream anaerobic digestion liquors. To avoid dissolved methane stripping, oxygen is introduced through gas-permeable membranes, which also from the substratum for the growth of a biofilm likely comprising ammonium oxidizing bacteria...

Mass balance analysis and water quality model development for paddy field were performed using field experimental data during 2001-2002. About half (47-62%) of the total outflow was lost by surface drainage, with the remainder (490-530 mm) occurring by evapotranspiration. Most of nutrient inflow and outflow were mediated by fertilization and plant uptake, respectively. Nutrient outflow by surfa...

The success of flotation operation depends upon the thriving interactions of chemical and physical variables. In this work, the effects of particle size, bubble size, and collector dosage on the bubble loading in a continuous flotation column were investigated. In other words, this work was mainly concerned with the evaluation of the true flotation response to the changes in the operating varia...

Shot peening applies a residual compressive stress field (RCSF) on the surface of parts. It also shifts “crack nucleation sites” to sub-surface locations. A nondestructive method of measuring the stresses, Sin2ψ was utilized here and the stress values introduced to Ansys software. For this purpose, uniform stress in all directions was applied on the con rod. Loading on the rod in Ansys had thre...

In this section, we want to model a surface with flaws. We model it as a line from which N parallel cracks progress into the 2D material (see Fig. 2). The ensemble of cracks is submitted to a remote mode I loading p∞ as sketched in Fig. 2, but, because of the interactions between the cracks, each crack i (i = 1, ...N) is submitted locally to both a normal traction pi(x) and a shear traction ti(x).