During tertiary miscible gas injection direct contact between gas and oil can be prevented by water surrounding residual oil. The principal aim of our study is to assess the importance of this waterblocking phenomenon in multicomponent gas injection. We study this process using a multicomponent porescale model. Light components in the gas dissolve in the water and diffuse through the water to r...

block heights and capillary continuity between matrix blocks play paramount role in the sensitivity analysis and therefore the history matching of cumulative oil production and production rate of carbonated fractured reservoirs. in this study, the influence of these parameters upon cumulative production and recovery factor of an iranian fractured reservoir were studied by the usage of a simulat...

During production from oil wells, the deposition of asphaltene and wax at surface facilities porous media is one major operational challenges. The crude rate significantly reduced due to inside reservoir. In addition, these solids costly companies. this study, efficiency different solvents in dissolving was investigated through static dynamic tests. analysis solid deposits choke Iranian carbona...

NMR well logging of petroleum reservoir require the measurement of the NMR response of water, oil, and gas in the pore space of rocks at elevated temperatures and pressures. The viscosity of the oil may range from less than 1 cp to greater than 10,000 cp. Also, the oil and gas are not a single component but rather a broad distribution of components. The log mean T1 and T2 relaxation time of dea...

In recent years, many core displacement experiments of oil by seawater performed on chalk rock samples have reported SO4 2−, Ca, and Mg as potential determining ions for improving oil recovery. Most of these studies were carried out with outcrop chalk core plugs. The objective of this study is to investigate the potential of the advanced waterflooding process by carrying out experiments with re...

The Karazhanbas Field (KBM) is a giant shallow heavy oil field in western Kazakhstan, less than 460 m depth. It contains heavy oil (μ ~400 cP) in seven reservoir zones from several to 40 m thick in unconsolidated sands with porosities 28-32%, permeabilities of ~0.5 D, and an arkosic lithology with angular grains. There is no free gas cap, and the structure is divided into fault-controlled block...

The oil producing country needs a real view of its oil reserves and the forecasts of production, to cover its annual expenditures. The most influence is on their market value which mostly depends on their reserves. Oil companies can build better investment portfolios or divest in particular fields. Finally, the investors and global bankers seek to use better data for comparing investment opport...

In Petroleum Engineering, reservoir management aims to maximise the profit from a hydrocarbon reservoir. Highly nonlinear numerical models, which describe the internal structure of hydrocarbon reservoirs, are used to make reservoir management decisions. These models are aimed at providing accurate predictions of the reservoir behaviour under different scenarios. This requires that the model par...

Gravity drainage is one of the important recovery mechanisms in fractured carbonate and conventional reservoirs. It occurs due to density difference between the gas in fracture and the oil in matrix as well as in conventional tilted reservoirs. Oil phase will form films which are produced under gravity forces (film flow). Many gas injection experiments have been done on laboratory scales with d...

The recent development of tight oil reservoirs has led to an increase in oil production in the past several years due to the progress in horizontal drilling and hydraulic fracturing. However, the expected oil recovery factor from these reservoirs is still very low. CO2-based enhanced oil recovery is a suitable solution to improve the recovery. One challenge of the estimation of the recovery is ...