Performance of a gas turbine is mainly depends on the inlet air temperature. The power output of a gas turbine depends on the mass flow rate of air. Now days the atmosphere temperature is hot, so the air is less density, the mass flow rate will reduce and automatically the power output will reduce. A reduce of 1°C temperature of inlet air increases the power output by approximately 0.7MW. To re...

In this study thermodynamic performance analysis of a combined organic Rankine cycle and ejector refrigeration cycle is carried out for use of low-grade heat source in the form of sensible energy. Special attention is paid to the effects of system parameters including the turbine inlet temperature and turbine inlet pressure on the characteristics of the system such as ratios of mass flow rate, ...

It is well established that inlet flow characteristics may affect the performance of fluid handling systems considerably. This work focuses on the local flow analysis of a severe service control valve with a continuous resistance trim (CRT) operating under multiphase flow conditions and the effect of the inlet flow characteristics on the dispersed phase distribution within the trim and the valv...

In this work, energy and exergy analyses are carried out for a combined cycle consisting of an organic Rankine cycle (ORC) and a liquefied natural gas (LNG) Rankine cycle for the recovery of low-grade heat sources and LNG cold energy. The effects of the turbine inlet pressure and the working fluid on the system performance are theoretically investigated. A modified temperature-enthalpy diagram ...

The variable displacement pump control system has greater energy-saving advantages and application prospects than the valve control system. However, the variable displacement pump control of differential cylinder is not concurrent with the existing technologies. The asymmetric pump-controlled cylinder is, therefore, used to balance the unequal volume flow through a single rod cylinder in closed...

BACKGROUND The purpose of the current study was to evaluate whether a totally implanted valved subcutaneous port system would have fewer complications as compared to a standard nonvalved port. METHODS Study subjects requiring port placement were randomized to receive a valved port (PASV; Boston Scientific, Natick, MA) or a nonvalved port (BardPort; Bard Accesss Systems, Salt Lake City, UT). E...

This paper studies the comparison of two kinds of port regulation modes – the centralization mode and the decentralization mode – using principal-agent theory and dynamic game theory. The optimal tariffs, port capacities and port efficiency levels under these two regulation modes are determined. The theoretical results are applied to the container terminals in Port of Shanghai in China. Sensiti...

Airspeed and turbulence measurements were collected in a full-scale swine grower facility. Data were collected in three horizontal planes at eight axial locations from the inlet sidewall. Three inlet slot heights (20, 40, and 60 mm) and two fan stages resulted in six ventilating conditions investigated. The resulting 2x3 x 8 factorial experiment showed that fan stage, inlet height, and axial po...

A numerical investigation was conducted to study the heat transfer in an aircraft cabin and the effects of air distribution under different angle and inlet velocity conditions. The Reynolds-averaged Navier–Stokes equations and the low Reynolds number turbulence model were used to simulate the airflow in the cabin. Mathematical statistics was used to process the relevant data, and statistical re...

Terrigenous loading into enclosed water bodies has been blamed for eutrophic conditions marked by massive algal growth and subsequent hypoxia due to decomposition of dead algal cells. This study aims to describe the eutrophication and hypoxia processes in a semi-enclosed water body lying near a big metropolis. Phosphorus mass balance in a small inlet, Ohko Inlet, located at the head of Hiroshim...