The pilot-scale NOx and SOx simultaneous removal from boiler emission was performed using radical injection and chemical hybrid process. The radical injection is often called as indirect plasma (or remote plasma) and air radicals are produced at room temperature with less than 1/10 of the flue gas flow rate. The flue gas from the boiler was in the range of 450~1,470 Nm/hr, the gas temperature o...

Based on the results of in vitro studies of many experimental models, a silicone hollow fiber membrane oxygenator for pediatric cardiopulmonary bypass (CPB) and extracorporeal membrane oxygenation (ECMO) was developed using an ultrathin silicone hollow fiber with a 300 microm outer diameter and a wall thickness of 50 microm. In this study, we evaluated the gas transfer performance of this oxyge...

This study develops a MEMS-based low-cost sensing platform for sensing gas flow rate and flow direction comprising four silicon nitride cantilever beams arranged in a cross-form configuration, a circular hot-wire flow meter suspended on a silicon nitride membrane, and an integrated resistive temperature detector (RTD). In the proposed device, the flow rate is inversely derived from the change i...

Cooling flow models for the hot gas in elliptical galaxies predict that gas is cooling at a rate of ∼ 1 M⊙ yr , yet there is little evidence for this phenomenon beyond the X-ray waveband. If hot gas is cooling, it will pass through the 3× 10 K regime and radiate in the O VI λλ1032,1038 ultraviolet lines, which can be detected with the Far Ultraviolet Spectroscopic Explorer (FUSE ) and here we r...

Abandoned oil and gas wells provide a potential pathway for subsurface migration and emissions of methane and other fluids to the atmosphere. Little is known about methane fluxes from the millions of abandoned wells that exist in the United States. Here, we report direct measurements of methane fluxes from abandoned oil and gas wells in Pennsylvania, using static flux chambers. A total of 42 an...

In this work, a mathematical model is established to describe the removal of CO2 from gaseous mixtures including CH4 and CO2 in a polypropylene hollow fiber membrane contactor in the presence of conventional absorbents such as monoethanolamine (MEA), methyldiethanolamine (MDEA), and a blend of them. Modeling was performed in axial and radial directions under the fully-wet condition for counterc...

This paper presents the use of CFD as a design tool in the development of rotary compressor for the purpose of reduction in Oil Circulation Rate (OCR). In the present work, CFD analysis is done using a commercial CFD package to simulate the discharge gas flow within the rotary compressor. Discharge gas flow path in the compressor is redefined by providing features that support OCR reduction. On...